Re: Powered jointer vs. jointing with hand planes
wilbur
>Adam,
As I posted in the main forum, I should have picked a better title for my question. I wasn't looking to start a hand vs. powered jointing discussion. I was looking for an explanation as to how important jointer table bed length is for a powered jointer. According to every review I've read on powered jointers, increased table bed length is seen as a plus. In addition, I do have a Rikon 10" combo jointer/planer machine, which has a 40" bed and most comments that I have read about this and similar machines, like the Inca, have been along the lines of, "The bed is too short and it makes the jointer unusable."
Which led to my question: if jointer bed length is so important for its use, how is it that you can flatten boards with a hand plane, which is much shorter than any powered jointer? After thinking about it some more, I've decided that jointer bed length can make your life easier, but it is not necessary for jointing even long boards.
As for me, I tend to turn to the powered jointer to get close to my desired surface, and finish off with hand planes. For edge jointing, I've been able to do this just with hand planes fairly easily, as you say, but for face jointing I find the powered jointer to be a real time saver. But that's just me.
I also agree your comment about Italians and Irish was unnecessary.
Wilbur