Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

If you had'nt bought one . . .

Posts

If you had'nt bought one . . .

#1

If you had'nt bought one . . .

s.mackay@worldnet.att.net

>you'd never have known how many uses . . . yadda, yadda.After putting up molding in the bedroon had a bit of crown left. Too much to throw in the overhead rack without consideration. Why not try a " deep " picture frame ? Like the way they look. Mitered and glued " frrehand " so the joints are'nt " all that ". How to even them out ? Lets just see what that #78 the WC Folks talked me into might do. This is one tool with a thousand uses. Although I'm sure a # 93 would fit MUCH better ( hint, hint ) we're feeling rather pleased this afternoon ! One of the better 30 bucks I've ever spent !

Re: If you had'nt bought one . . .

#2

Re: If you had'nt bought one . . .

David Churnega

>Definitly one of my favorites too. Keep your eyes open for a 778 on the cheap, same plane with fine ajustment of blade adjustment via screw.

Re: If you had'nt bought one . . .

#3

Unsung hero

jim reed @ tallahassee

>of the plane world. The #78 is just downright handy. When you have put in your time with it, think about graduating to its big brother the #289.

Re: If you had'nt bought one . . .

#4

Actually . . .

s.mackay@worldnet.att.net

>I got an " ugly " one a couple weeks ago. Need to tear it down and rehab it. With your recomendation I can't wait to put it to use. With the revelations of the 78 its hard to belive it would do as much " stuff " but, like I'm finding out, " once you've got one in the house . . . ". And to use another WC cliche . . . We're heading full steam down the slope !

Re: If you had'nt bought one . . .

#5

Re: Actually . . .

Mike G in SC

>Yep, I found mine to be extremely handy when installing square-edge floor planks a few years ago. Those planks are never exactly the same width so the trusty "78" laid on it's side does a good job of trimming the edges true after the row is nailed down. Helped to close the inherent gaps between rows of boards up considerably.

Mike G.

Re: If you had'nt bought one . . .

#6

Funny you should mention that . . .

s.mackay@worldnet.att.net

>Hardwood bedroom floor is looming soon. Thank you, now when I hit THAT bit of frustration it'll only last a moment. " Yes, Dear, I have a tool for that ! ".

Re: If you had'nt bought one . . .

#7

Re: Funny you should mention that . . .

Mike G. in SC

>Of course, I was using mine on square edged #2 Spruce 1x's, just your typical shelving board. I've done several of these floors for different clients and have visited some of them that I did 5 or 6 years or so. They actually look as good with a little wear and tear as they did new. Sanded to 220 grit, stain then 3 coats of floor sealer.

I don't think the 78 will work on T&G though.

Mike G.