Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

advice on simple machinist toolbox

Posts

advice on simple machinist toolbox

#1

advice on simple machinist toolbox

craig

>I'm basically a hobbyist with simple hand tools, a few card scrapers, some files, a couple chisels, etc. I was looking at something like a Kennedy model 520.

Any thoughts on a metal box like that versus a more traditional oak model? or any other advice? ...reputable dealers, etc.

Re: advice on simple machinist toolbox

#2

Re: advice on simple machinist toolbox *LINK*

Andy Lincoln,In Dearborn MI

>Craig,

I don't see a problem with the Kennedy Box,I'll bet Craftsman has an identical box as well.If you happen to live in an area that has a tool store devoted to machinist/metalworkers/tool and die etc. you should be able to hands -on touch most any box out there.Here in MI 2 places come to mind J&L Industrial(I know they are various locations in the US ) and Production Tool Co. Also Ebay is a great source,as well as Craigslist.There is another post here on WC with the same type question with many replies as well.


WC Posting Machinist box

Re: advice on simple machinist toolbox

#3

I have a Kennedy boxes *LINK*

Scott Burr in Ben Lomond CA

>I keep my tools in, screwdrivers sockets etc. I've them for years with mo problems.

I'm a bit leary of keeping my WW tools in one because of the moisture where I live.


Kennedy Mfg

Re: advice on simple machinist toolbox

#4

Re: advice on simple machinist toolbox

Bart Leetch

>I have had this box for 34 years & used it for miscellaneous items I can tell you this if you carry on with your wood working hobby you will have to do something different before to long as you will out grow it. They are light duty boxes with light duty glides.


img

Re: advice on simple machinist toolbox

#5

Re: advice on simple machinist toolbox

Bart Leetch

>I forgot to say the glides are pretty well worn out & for the last 10 years it has set in storage with little needed stuff stored in it.

I would build my own tool box . The tool Box Book by Tolpin would give you lots of ideas. Remember tool boxes with drawers are nothing more than boxes within a box.

Re: advice on simple machinist toolbox

#6

Re: advice on simple machinist toolbox

Bart Leetch

>I am in the process of making room for this tool box that I will make.

A friend & I are in the process of making box joint jigs for both of us.


img

Re: advice on simple machinist toolbox

#7

Re: advice on simple machinist toolbox

Bart Leetch

>You can check out the tool box here.

http://www.taunton.com/finewoodworking/ProjectsAndDesign/ProjectsAndDesignPDF.aspx?id=27574

Re: advice on simple machinist toolbox

#8

But if humidity's not as big an issue for you

Bill Houghton, Sebastopol, CA

>they're great. I've got a metal Craftsman that I keep my uncle's machinist's tools in (and some other, related stuff), plus I have three rollaway toolboxes and two other top boxes, with one rollaway being for small WW handtools (well, and one drawer's got some bits for a thing that whirls around loudly).

While the North Coast gets moist, I've never had rust problems here.

The drawers on Kennedy top boxes are felt-lined, which should help with any moisture concerns.

Re: advice on simple machinist toolbox

#9

Re: But if humidity's not as big an issue for you

Bart Leetch

>Another thing I would like to mention is some of the Kennedy tool boxs have very shallow drawers be careful not to get one of these they are like mine made for a machinist that has lots of small items to store where as a wood worker has tools that are a bit bigger more like a pattern or tool & die makers tools. I think a mechanics box may do just fine.