Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Sharpening a Broad Hatchet

Posts

Sharpening a Broad Hatchet

#1

Sharpening a Broad Hatchet

Patrick Gibbbons, Houston, TX

>Some prefer what I would call a back bevel on their drawknives. Is this how a broad hatchet is sharpened or should the back be perfectly flat like a chisel?

Re: Sharpening a Broad Hatchet

#2

Re: Sharpening a Broad Hatchet

Stephen Shepherd in the State of Deseret

>Sharpen it like a chisel or plane iron. All of this talk of back bevel is piffle.

Stephen

Re: Sharpening a Broad Hatchet

#3

piffle : trivial nonsense

vlparisian in Houston

>I had to look it up. figured it out from the context

Re: Sharpening a Broad Hatchet

#4

Re: Sharpening a Broad Hatchet

Adam Cherubini

>You don't want a back bevel, but a good broad hatchet with have a subtle curvature height-wise. In use, it makes a cut not unlike a jack plane's curved blade. Don't remove this from your hatchet! I tried to clean up the back, and remove any shallow pits near the edge.

You can hew with a double beveled hatchet. I don't find it quite as convenient since the swing is funny with the hatchet held crooked so you can kiss off the near side bevel. I do it, but I don't like it. What I want is a really little broad hatchet. A broad hatchetino!

Adam

Re: Sharpening a Broad Hatchet

#5

Re: piffle : trivial nonsense

Robert Henderson

>Good word though.

I'm starting a "bring back 'balderdash' campain myself.

Re: Sharpening a Broad Hatchet

#7

Re: Sharpening a Broad Hatchet

Todd O. Cronkhite Maine Native, Presently Away

>Piffle? HA! That made me loud out loud! not quite sure I've ever heard the word before, or if I have I've forgotten.

I didn't look it up, but I thought that it some along the lines of bull-dooky.

I myself haven't been fooling enough with planes lately to know if a back bevel is effective or not, so I shan't argue the point.

T.O.

Re: Sharpening a Broad Hatchet

#8

Re: piffle : trivial nonsense

Tony Zaffuto

>My former plant manager would use the word "Balderdash" quite freqently, along with "Bully" on occassions. He also wore round spectacles just like Teddy Roosevelt. I knew he had issues about three years ago when on a business trip he carried a book about Donald Rumsfield with him, and he would wax eloquently on how Rummy should have been our president. Later admitted he never read the book and that whenever he started to read, it would put him to sleep.

Became a former because he couldn't manage although I kept him around a bit longer than I should because of the 3" slick (no maker name present) that he gave me.

Dang what we do for tools!

Re: Sharpening a Broad Hatchet

#9

Re: Sharpening a Broad Hatchet

Patrick Gibbons, Houston, TX

>Adam, I just got a brand new Vaughn broad hatchet and it came to me with a slight back bevel. Also the back is in need of flattening a lot. Any suggestions on the best way to go about flattening it? Also I notice in the 1923 Stanley catalog reprint that Stanley offered 4 or 5 different sizes of broad hatchets (as did other manufacturers). I know you're aware of this but it would be nice to find a smaller size. I looked on ebay for a few months and don't remember seeing any of these smaller hatchets.

Re: Sharpening a Broad Hatchet

#10

Re: Sharpening a Broad Hatchet

Tony Zaffuto

>Patrick--where did you buy the Vaughn (Highland Hardware???). Is the Vaughn still American made? Was it handled and if so, was it handled properly?

Re: Sharpening a Broad Hatchet

#11

Re: Sharpening a Broad Hatchet

Stephen Shepherd in the State of Deseret

>Adam,

Consider a small Coopers Bench Ax works well for light applications.

Stephen

Re: Sharpening a Broad Hatchet

#12

apologies to Steven Shepherd

vlparisian - Houston

>I didn't intend to make light of your posting. I think your response is most likely the corrrect answer. I do not own a broad axe, but looking at its intended use your answer makes great sense. And I love the word piffle.

Victor - In beautiful Pearland TX

Re: Sharpening a Broad Hatchet

#13

Re: apologies to Stephen Shepherd

Stephen Shepherd in the State of Deseret

>Victor,

Yours and others response was mild compared to what I thought people would respond to the back bevel nonsense.

Todd thought I was going to get slammed, so I found the responses amusing.

No need to apologize, your response just added to the delight.

Stephen

Re: Sharpening a Broad Hatchet

#14

Re: piffle : trivial nonsense

vlparisian - Houston

>One last word before we move on. From Sgt Little our Mess Seargent at 52nd Milatary Police Co, Ft. Sam Houston 1970: Everything good was always 'copacetic'.

How are you feeling today? "Copacetic"

How is dinner coming? "Everything is copacetic."

love that word.

Victor in Beautiful Houston, TX

Re: Sharpening a Broad Hatchet

#15

Re: Sharpening a Broad Hatchet *LINK*

Patrick Gibbons, Houston, TX

>I got the Vaughn from the site below. It was a good price. The Vaughn is still American made and it was handled very well. However, I'm left handed and would have preferred it supplied with a handle and wedges and left to me to handle. Now I'm going to have to rehandle it for my use.


http://www.hechinger.com/web/catalog/product_detail.aspx?pid=71910&cm_ven=Google&cm_cat=HandTools&cm_pla=Vaughan%20%26%20Bushnell&cm_ite=Vaughan%20%26%20Bushnell%20SB2&cm_typ=GenGen&cm_rnk=2&cm_mid=389&cm_wid=T&s_kwcid=vaughan%20%26%20bushnell%20sb2|

Re: Sharpening a Broad Hatchet

#16

Re: piffle : trivial nonsense

Tony Zaffuto

>Heard that word also: about thirty years ago was a common word for a friend who is now in his mid 80's. Also, I beleive the Grateful Dead used it in a song on the album that "Touch of Gray" was on (maybe even that song).

Re: Sharpening a Broad Hatchet

#17

Re: Sharpening a Broad Hatchet

Adam Cherubini

>Patrick,

How about a coarse file? I would start there, then go to some sort of beltsander.

Adam

Re: Sharpening a Broad Hatchet

#18

Re: piffle : trivial nonsense

Mike L (Orange County, CA)

>Hi Tony,

The song is West LA Fadeaway - "It's a shame those boys couldn't be more copacetic." Words by Robert Hunter; music by Jerry Garcia.

Regards,

Mike