Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

'Nother Lensboard...

Posts

'Nother Lensboard...

#1

'Nother Lensboard...

Scott in Douglassville

>Ok, I'm sure no one cares at this point, but here's another lensboard I just finished. It's actually a lensboard adapter, made to allow smaller lensboards (with lens attached) to be used in different cameras without having to remount the lens:


With the smaller Technica-style board installed:


This was made with a small scrap of curly cherry I'd kept for unknown reasons years ago. Cleaned up wonderfully. Board's just shy of 3/8" thick. The corners are joined with half-laps, pinned with cherry dowels:



FWIW, this is going into a Burke and James. The client is going to supply his own clamping hardware.

Well, all this camera fabbing has gotten me back into woodworking. My joinery's tighter than it ever was before, and I'm really enjoying it now. I have a Senece Competitor 5x7 on its way here right now, which will need a little woodworking to repair:


After that, I think I'm finally ready to start designing and building a 4x5 from scratch. Wife's gonna kill me... :^D

Thanks for looking.

Scott

Re: 'Nother Lensboard...

#2

Re: 'Nother Lensboard...

Joe Rogers, Northern Virginia

>Hey Scott...glad you are enjoying the ww. I can see this fits in well with your "other" profession.

BTW is the hand completely recovered?JR

Re: 'Nother Lensboard...

#3

Re: 'Nother Lensboard...

Paul Kierstead

>Ohoh. Building a 4x5 from scratch is gonna be painful; it's the hardware that kills you.

I've often heard it said on the LF boards that you can be a camera builder or a camera user, but you can't be both.

Re: 'Nother Lensboard...

#4

Re: 'Nother Lensboard...

Scott in Douglassville

>You know, I'm taking my lead on this from a guy I know who built his own 4x5. His commentary was that almost all the brass is slightly modified off-the-shelf stock and angle. Now, what slightly modified means is open to interpretation... ;^)

Re: 'Nother Lensboard...

#5

Re: 'Nother Lensboard...

Scott in Douglassville

>Thanks, Joe. Yeah, hand's as recovered as it's gonna be. Have about 2/3 of a nail on one finger, split straight down, just left o' center. Workable, though. Thanks for asking.

Re: 'Nother Lensboard...

#6

Well I care...

Scott Burr in Ben Lomond CA

>I like to see these kind of things! Looks like your starting a cool little home business eh!?!

Nice tight joints... Reminds me of my college daze;^)

Re: 'Nother Lensboard...

#7

Re: 'Nother Lensboard...

Ernie Miller

>in the past I have seen a couple old cameras simular to that ar estate sales. in the $20-25 range is this somthing I should be picking up? is there a value in them the bellows are almost allways cracked.

Re: 'Nother Lensboard...

#8

Re: 'Nother Lensboard...

Dan Donaldson

>Check to see if it has the lens. If so, it is probably worth it.

Re: 'Nother Lensboard...

#9

Re: 'Nother Lensboard...

Paul Kierstead

>Old LF camera's are much old tools. There are ones that are highly valued, even in poor-ish condition, and others no one wants much even in good condition. This is regardless of utility or function.

Bellow replacement is quite expensive (particularly for "authentic" bellows) although they can be repaired.

I'd say stay away from buying them unless you know how to market the wares afterwards.