Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

18th c drawings on blog

Posts

18th c drawings on blog

#1

18th c drawings on blog

JOhn Hoffman

>Hi Adam. I was studying your drawings on the blog for your standing desk. I noticed on the top section you have the portion marked 9/17. This leaves the other part of the top at 7/16 and I remember you mentioned this in your A&M article in PWW. You said this doesn't always equate to the golden section? Are you going to write more on this?

Thanks

JH

Re: 18th c drawings on blog

#2

Re: 18th c drawings on blog

Adam Cherubini, NJ

>9/16 is less than golden section. I see it used but have never seen it referenced anywhere. All I know is it makes stuff good looking.

Adam

Re: 18th c drawings on blog

#3

Re: 18th c drawings on blog *LINK*

Wiley Horne--So. Cal.

>Hi Folks,

I'd just like to add that this drawing approach that Adam has developed is the most useful that I have ever seen. It shows the main joinery details, which is frequently a big mystery. And then in elevation drawings, shows the relative sizes of the main and subsections--all in scalable form.

The scalable feature of these drawings is great because it lets you apply the Golden Section principles and column-order principles directly to the space you're trying to fit.

I'm way impressed. See link below for a picture.

Wiley


Adam's blog/Standing desk

Re: 18th c drawings on blog

#4

Re: 18th c drawings on blog

Adam Cherubini

>Every one of those structural elements is on a seperate layer in photoshop. You can expect to see some pretty cool exploded views of this project in the articles to come. Its not a 3d model so I can't rotate it, but if we get to the end and there's anything you can't see, let me know and I'll post it to my blog.

Adam

Re: 18th c drawings on blog

#5

Re: 18th c drawings on blog

Pam Niedermayer - Austin, TX

>It would be nice if all the major dimensions had letter labels and all the deritive dimensions had the percentage followed by the letter. For example, it's not immediately clear that the .618 from front to back is .618w rather than the same .618 from foot to apron.

Pam