Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

[AD] Hamler Miller Plough Plane -- Last Call!

Posts

[AD] Hamler Miller Plough Plane -- Last Call!

#1

Ellis Walentine

[AD] Hamler Miller Plough Plane -- Last Call!

Ellis Walentine

>

REPRODUCTION PLANE KITS
1882 Miller Patent Plough Plane
ONLY 8 LEFT! ACT NOW!

FROM
Hamler Tools

Paul Hamler, well-known among tool collectors and aficionados for his remarkably accurate miniature and full-size reproductions of early woodworking tools, has created a limited edition of the Miller Patent Plough Plane, one of the most ornate and sought-after hand-tools of the Victorian era. Original Miller Patent planes in good condition typically sell in the $25,000 range.

Paul has sold over 375 completed planes, the last 125 at a price of $800 each. Now he is offering 80 8 of the remaining planes as kits, for $400 each, including shipping to the lower 48 US states.

Hamler investment-casts these planes in silicon-bronze. The kit comes fully assembled, with all drilling and machining completed by Hamler Tool. To complete the plane, you will need to disassemble the plane, smooth the surface areas of the castings (including the filigree work on the main body, skate and fence), apply a patina, if desired, and reassemble the plane. Then simply pein two pins and press-fit the knob into the fence in any vise with afour-inch opening.

These planes are fully functional and include one 1/4" iron of 01-tool-steel that can be hardened to your desired Rockwell hardness. The blade is non-tapered and has a V-groove that aligns with the skate. Other widths will be available from Jim Reed, NOT from Paul Hamler as previously mentioned.

To order or for more information, e-mail hamlertools@hotmail.com.



Re: [AD] Hamler Miller Plough Plane -- Last Call!

#2

Re: [AD] Hamler Miller Plough Plane -- Last Call!

Charles R. Smith

>I couldn't resist temptation. Now there are only 7 kits left for sale. Mr Hamler sounds like a lovely southern gentleman who is passionate about this plane -- I can't wait to see and enjoy his handiwork.

Charles in Victoria (who is looking forward to his new toy)

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#3

He's a good guy! You can't go wrong

Scott Burr in Ben Lomond, CA

>Talked to him yesterday about the patinaning (sp) process we chatted for a 1/2 hour or so. Very nice gentelman with a sharp whit and a good sence of humor. I'll try to post some pics on my progerss soon. Too much fun playing with and finishing it, but I've got a lot of pic on it's progress.

Oh yea, I should share something you something with you all.

Naaa maybe later...

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#4

The blade sets

jim reed @ tallahassee

>I have polled lots of you and the overwhelming response has been for a seven blade set. This set includes: 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, and 1". Measured in 16th, the set has 3,4,5,6,8,10,16. I am stamping them with an "H" in recognition of their proud papa. First ten sets should be available around 1 April. Does this sound like a good plan?

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#6

Re: The blade sets

Wiley Horne--So. Cal.

>Jim,

I'll be placing an order. Real soon.

However, I would way rather have a 1/8" than a 1". Or request it as a custom item, in addition to the set. Will a 1/8" work in the plane? And I gotta ask: Is someone out there actually ploughing 1" grooves?!

Wiley

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#7

Re: The blade sets

jim reed @ tallahassee

>The skate is just shy of 3/16", so the 1/8" will not work. As for the 1", I made some for show and they seem to be popular. More for looks than function, I think.

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#8

Re: The blade sets

mikew

>I can see the 1" being used for rebates. I myself would probably not choosing instead other options. But as part of the set, who knows...

Take care, Mike

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#9

Thanks Jim

Wiley Horne--So. Cal.

>Mainly, I'm just real pleased you'll be making the sets! I do think Ellis had a good point about grinding a coupla degrees relief angle behind the cutting face of the blades, but we can do that ourselves to our own taste. I also like a real slight longitudinal taper as you go up the blade, and can do that myself also.

Wiley

Re: [AD] Hamler Miller Plough Plane -- Last Call!

#10

Relief Part II

Jim Reed @ Tallahassee

>Feel free to customize. Even a slight relief angle would be easy to stone on. And remember, only the last half inch or so ever touches wood. Even though I am not a big believer in the reliefs, I will be glad to grind some sets if the demand is there. It takes specialized grinding equipment and totally revises my production plan, but I aim to please. Once I get a handle on the cost model, I will poll the users.