Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

New out feed rollers for TS

Posts

New out feed rollers for TS

#1

New out feed rollers for TS

Kevin French

>I KNOW this set of rollers are for the dark side of WW'n, but the M&Ts were cut by hand.

I found this (chair?) base in the dump a couple years ago and I've been moving it around the shop trying to figure out what to do with it.

I am going to cut some 12' canoe poles and you guys didn't like the idea of the individual rollers that I built so I needed to make one with solid rollers. About the time I figure I needed new rollers I tripped of this base and I saw my new roller stand.

I built it so it's lowest point is TS heigth and pull it up for my RAS and the CMS. Step on the pedal (on the column between the front two legs) and it goes back down.


img

Re: New out feed rollers for TS

#2

That is an over the top fine base

Bill Houghton, Sebastopol, CA

>I like the curly bits above each leg.

Re: New out feed rollers for TS

#3

Re: New out feed rollers for TS

Ernie Miller

>You need to do that thing some justice and go back and cut some scroled sides to hold them rollers they don't even have to be carved but should be. that one needs to be pimped out not Todd o'ed out. I can see the mother of all out feed rollers there but you stoped short.

Re: New out feed rollers for TS

#4

Re: New out feed rollers for TS

Kevin French

>Yes I did Ernie, I needed an out feed table TONIGHT.

Re: New out feed rollers for TS

#5

NO! It can't be NO! It's the attack of the...

Scott Burr in Ben Lomond CA

>Maroon Stanley block plane! Run away!

Interesting idea for the base. I agree with Ernie the top needs some carving to match the base.

Re: New out feed rollers for TS

#6

Re: NO! It can't be NO! It's the attack of the...

Kevin French

>It WORKS and it was CHEAP.

Re: New out feed rollers for TS

#7

Re: New out feed rollers for TS

Ernie Miller

>I understant completly and ha Todd O is my friend so I can make them statements. We are going to put him in the WC dictionary That thing is Todd O'ed! I mean that in a good way. really I do