Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Re-inventing the Yankee

Posts

Re-inventing the Yankee

#1

Re-inventing the Yankee

Edward in Vancouver

>Not intentionally, but I scooped up a Yankee (not sure which model, but one of the larger ones) and the newest issue of Shopnotes at around the same time. The Yankee came without bits, and while thumbing through S.N. I came across a, well, enlightenment, a paradigm shift you might say. The photo inset on pg 49 of Shop Notes showed a hex adaptor made for Yankees. Things clicked. No need to buy yet another set of dedicated screwdriver bits, I have a biscuit tin of hex bits and even some drill bits mounted into hex drivers. L.V. sells dedicated Yankee style bits but not the hex adaptors, so I guess I'll have to fabricate one.

Any of you know if the metal on most of the electric drill style hex adaptors is soft enough to mount in a wood turning lathe chuck and dress with a file so it's round and the right diameter to fit into a Yankee? If I can get it to that stage, then it's even easier to cut in a slot and grind off the back a little to make the hex adaptor fit into a Yankee chuck...

Re: Re-inventing the Yankee

#2

Re: Re-inventing the Yankee

Rick W

>Yes, you can do this. If it won't file, try grinding it.

Rick W

Re: Re-inventing the Yankee

#3

Re: Re-inventing the Yankee

Joe Rogers, Northern Virginia

>Go to Galoots Progress. Tom Price did just this thing and has instructions there.JR

http://homepage.mac.com/galoot_9/galtprog.html

Re: Re-inventing the Yankee

#4

Re: Re-inventing the Yankee

Robin Corell in Atascadero, CA

>I have a ratcheting screwdrver, the kind with a hex holder and a bunch of bits in a plastic handle that has been sacrificed to do the exact thing you are contemplating. only diference is mine is for a millers falls.

Lacking a chuck for my wood lathe I chucked it up in my drill press and used a grinder and a file.

I don't understand why one of these is not sold in tool stores. For many things a yankee can still keep up or even out perform a cordless drill.

Robin Corell

Re: Re-inventing the Yankee

#5

Adapters are available

Tom in central PA

>McFeely's (mcfeelys.com) carries two different adaptors to fit hex bits to a Yankee screwdriver (each in several sizes)-- for only about $12 if I remember correctly.

Re: Re-inventing the Yankee

#7

Re: Yep...

Edward in Vancouver

>Thank you very much gentlemen. You can bet that my Yankee will be pulling a lot of duty in the next little while. If the ol' 14V B&D drops off the bench one more time, it'll be toast, and I think that will happen very soon when I reach over it to grab the Yankee.....

Re: Re-inventing the Yankee

#8

Nope

Todd O. Cronkhite Maine Native, Presently Away

>Since you want to drop that cordless one more time you never will. Matter of fact, if you do knock it off the bench accidently it'll probably float. Good Luck. ;~)

Todd O.

Re: Re-inventing the Yankee

#9

Re: Re-inventing the Yankee *LINK*

Tom Price

>Here's the link to the 'brew your own Yankee adapter' page.

Installing FIOS today. Whoo-hoo!

- Tom


Homebrewed adapter for middle-sized Yankee (30)

Re: Re-inventing the Yankee

#10

Re: Re-inventing the Yankee

Joe Rogers, Northern Virginia

>Thanks for the tip in. I went back and tried to find the instructions and couldn't find them! Glad you stopped in and gave the coordinates!JR