#70 router
woodenLeg
>Any idea of where I can get new blades for a Stanley #70 router?
Thanks Dave
#70 router
Posts
Re: #70 router
#2Re: #70 router
Marc in Luxembourg
>Dave,
As far as I know, the blades of the Veritas router fit the Stanley. Not sure, but give them a phone call and you'll know for sure.
Regards,
Marc
Re: #70 router
#3Re: #70 router
Clint Jones
>Which one do you need. I have one I could send you for $5 . Just let me know your address
Re: #70 router
#4Re: #70 router - #71? *LINK*
Bill Houghton, colder than Boston, Sebastopol, CA
>The big Stanley router is the No. 71 (or 71-1/2), as described below. That's what you're asking about, right, rather than the No. 70 box scraper?
Patrick Leach on the No. 71
Re: #70 router
#5Re: #70 router - #71?
woodenLeg
>I was wrong it is a 71. Dave
Re: #70 router
#6Re: #70 router
woodenLeg
>I found some cutters on Lee Valley's site, I think I will order them. Thanks again. Dave