Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Hey, Dave Mount 1of 5

Posts

Hey, Dave Mount 1of 5

#1

Hey, Dave Mount 1of 5

Todd O. Cronkhite Maine Native, Presently Away

>Down and dirty real quick, I am going to post 5 pics of a old worm eaten half rotten plane that this morning I found hiding in my "I'll-get-to-that-someday-and-than-forgot-all-about-it" drawer.

The plane is 9.5"long, 3.75" tall, and 1 3/16" wide. For the Aye-ron: the blade itself is 1 3/16" wide at the bottom, 1 1/8" wide at the top, and 1 7/8" tall. The blade also tapers from 1/8" thick at the bottom to 1/16" thick at the top. The tang itself is 5 1/8" long.

With the blade installed the mouth opening is 3/16"

I also have a shot of the wedge just to show the profile of the end where the shaving encounter it.

Hope these help, andif you need more pics let me know, tho it may be awhile as I have to go run some errands.

Todd O.


img

Re: Hey, Dave Mount 1of 5

#2

Re: Hey, Dave Mount 2of 5 

Todd O. Cronkhite Maine Native, Presently Away

>


img

Re: Hey, Dave Mount 1of 5

#3

Re: Hey, Dave Mount 3of 5 

Todd O. Cronkhite Maine Native, Presently Away

>


img

Re: Hey, Dave Mount 1of 5

#4

Re: Hey, Dave Mount 4of 5 

Todd O. Cronkhite Maine Native, Presently Away

>


img

Re: Hey, Dave Mount 1of 5

#5

Re: Hey, Dave Mount 5of 5 

Todd O. Cronkhite Maine Native, Presently Away

>


img

Re: Hey, Dave Mount 1of 5

#6

Hey Todd, Nice find ... what is it?

vlparisian - Houston

>Maker and age that is?

Re: Hey, Dave Mount 1of 5

#7

Re: Hey Todd, Nice find ... what is it?

Todd O. Cronkhite Maine Native, Presently Away

>One the body of the plane I was able to make out "Conway Tool Co. Conway Mass." I bought it along with 5 other moulders at a flea market for $5 each a few years ago thinking that I'd use them to learn how to make them.

T.O.

Re: Hey, Dave Mount 1of 5

#8

Re: Hey, Todd O

Dave Mount

>Looks like a new body will be in order, but that's not that hard (trust me). It even looks like you could just cut off the body below to escapement and patch on a new piece and you wouldn't even have to cut a wedge mortise, just recut the bed and away you go!

I haven't seen many rebate planes with the AYE-run set straight across -- all I have (not that it's that many) have a skew AYE-run.

The circa 1/8" AYE-run thickness seems to be pretty common in molders and is what all the sources I looked at suggested for things like hollows and rounds or other profile molders. I'm assuming it's the skew that got me in trouble with the combo of 1/8" thickness and a narrow tang.

Looks like the AYE-run might have a little pitting, but you can do the ruler trick thing on it and it should be fine. You'll wanna' bang that tang straight again too.

I have a 78 that I've used for shaving tenon cheeks, but with the iron set as it is in this plane I wasn't 100% happy with it for tenon cheeks, but it works great for rebates.

Quit posting and start making that plane body (and then resume posting)!

Best,

Dave

Re: Hey, Dave Mount 1of 5

#9

Re: Hey, Todd O

Todd O. Cronkhite Maine Native, Presently Away

>As a matter of fact Dave, I brought home a scrap piece of of soft AYE-ron from the metal shop the other night to make a float out of.

Do give a small break tho, I have just now got the shop functional, and I have so many things I want to do that I'm flapping around my shop like a chicken with it's head cut off doing this and that. Didn't get much dome today, but did manage to make a mini platform that'll go in my vise for working on small things at a higher level.

Just as I got that done I remembered about the portable shoulder vise that clamps into the metal vise, so I'll make that next. I think it was Carol that posted a pic of it awhile back.

T.O.

Re: Hey, Dave Mount 1of 5

#10

Re: Hey, Todd O ...shoulder vise???

George in Lowell Mich.

>How about pics when it is done?????

Work safe

George in snowy Mich.

Re: Hey, Dave Mount 1of 5

#11

Re: Hey, Todd O ...shoulder vise???

Todd O. Cronkhite Maine Native, Presently Away

>No problem Grorge. I'll post pics of it's construction as well.

T.O.

Re: Hey, Dave Mount 1of 5

#12

Re: Hey, Dave Mount 1of 5

Ernie Miller

>You gotta do a better job of taking care of your tools Todd! I have a peice of dry Osage orange if you want tot make a new body for it?