If you sell to woodworkers, your customers are already here
Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

Finish for a tool cabinet?

Posts

Finish for a tool cabinet?

#1

Finish for a tool cabinet?

Mick Foley (Berkely, CA)

>Hey all -

I'm working my way though building an electron free wall mounted tool cabinet and I was wondering what a good finish would be. Looks are not important - the wood is poplar - but I am interested in durability and especially rust prevention. Does any one have any pros or cons here? There will be some tools resting directly on the wood, so I don't want anything that will encourage rust. At this point I am considering BLO, shellac or no finish at all, but I am open to just about anything that does not require too much skill to apply.

Thanks for any advice!

Mick

Re: Finish for a tool cabinet?

#2

Not sure how much it matters, but no expert, me

Bill Houghton, Sebastopol, CA, sorta cold

>It would seem like no finish, or oil, which are at the vapor-permeable end of the finishing continuum, would be best.

Re: Finish for a tool cabinet?

#3

I used...

Christopher Fitch@Memphis

>Shellac on mine. It went on fast, smelled good, and looks nice on birch plywood and poplar.

I didn't bother to do much with the finish short of sanding between coats. After all it will get beat up a bit with use.


img

Re: Finish for a tool cabinet?

#4

Re: I used...

Paul Erickson

>Looks great Christopher. Any chance of seeing a picture of the inside?

Re: Finish for a tool cabinet?

#5

Sure...

Christopher Fitch@Memphis

>Here's the series...

image 1

image 2

image 3

image 4

image 5

I listed them as links instead of including them directly.

Re: Finish for a tool cabinet?

#6

Someday my shop will look like that.

Roy Anderson

>Break a leg. I feel a tantrum coming on. I'm going to hold my breath until I turn blue. You can't play with any of my toys. My Daddy can beat up your Daddy.

Nice shop.

I downloaded your pic and I'm sticking it to the wall of my shop until my shop looks like that.

Re: Finish for a tool cabinet?

#7

Re: Sure...

Paul Erickson

>Excellent! Thanks very much.

cheers, Paul

Re: Finish for a tool cabinet?

#8

Re: Someday my shop will look like that.

Christopher Fitch@Memphis

>Well it's not looking too good right now or at least the other half is not. I'm having to remove lots of drywall in to prepare for some termite damage repair.

Re: Finish for a tool cabinet?

#9

Nice!

Joe Rogers, Northern Virginia

>

Re: Finish for a tool cabinet?

#10

How's about...

Scott Burr in Ben Lomond, CA

>Milk Paint.

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.