Rehandling an Oval Bolstered Mortice Chisel *LINK*
Derek Cohen (in Perth, Australia)
>I have included below a link to a tutorial recently completed on rehandling an OBMC. I hope that this is helpful for some.
Re: Rehandling an Oval Bolstered Mortice Chisel *LINK*
#2New LINK *LINK*
Derek Cohen (in Perth, Australia)
>The previous address has extra information, so corrupting it. Below is correct.
Derek
OBMC tutorial Link
Re: Rehandling an Oval Bolstered Mortice Chisel *LINK*
#3
Re: New LINK
Jack Guzman from Maine
>Thanks for posting that Derek. Useful post.Great pictures too.---Jack
Re: Rehandling an Oval Bolstered Mortice Chisel *LINK*
#4Another useful article to save
Bill Houghton, 24 deg F today, Sebastopol, CA
>For some reason, I'd never thought about shaping the handle "in place" on the chisel, but of course it makes perfect sense. Thanks, Derek.