Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Round Tenon Cutter - Plans?

Posts

Round Tenon Cutter - Plans?

#1

Round Tenon Cutter - Plans?

Joe Hurst

>Hello Everyone,

Does anyone happen to have a plan, or easy to follow link, for a easy-to-make tenon cutter?

My University is doing "Fiddler on the Roof" this Spring, and I have a small town to furnish. (The set includes 4 separate post-and-beam structures, but I'll worry about that later.) As much as I would like to buy the Lee Valley cutters, my budget does not allow for it.

The good news is that we're going GREEN (wood, that is). A few professors have invited us into their backyards for stock. (I also have a local tree farmer who sells me his ugly stock for a song.) Thankfully, I won't be working with 4x8 sheets of foam, like last year.

Thanks in advance,

Joe

Re: Round Tenon Cutter - Plans?

#2

Re: Round Tenon Cutter - Plans? *LINK*

Pam Niedermayer - Austin, TX

>Draw knives are very fast, followed by spokeshave, just make a plastic template to gauge your work.

As far as round tenon cutters, think pencil sharpener. I think making one would be tedious and fraught with trial and error.

Have you checked out LV's new tapered tenon cutters? They're pretty cheap, $19.50 each.

Pam


LV new tapered tenon cutters

Re: Round Tenon Cutter - Plans?

#3

Re: Round Tenon Cutter - Plans?

Jim Crammond in Monroe Michigan

>Joe,

If I recall correctly, Roy Underhill had plans for one in one of his books, though I think he called it by a different name.

Hollow augers are fairly common on the old tool market. These wor in tandem with spoke pointers to make round tenons. There is a limit to the size of tenon that you can make however. Both of these tools usually range between $15 and $40.

Jim

Re: Round Tenon Cutter - Plans?

#4

Re: Round Tenon Cutter - Plans?

thomd

>It is a faily simple tool the blade is just a plane bladed with the infeed corner cut off at 45 degrees. You make a piece of wood up like a butterfly bolt and cut in the bed for the blade so it arrives at 45 degrees to a radial point. When you feed in the stock the 45 cuts the shoulder until the tenon diameter is reached.

You could probably figure out a way to use a hole saw to make tenons.

There is a plan for making a tapered tenon cutter in Drew Langsner's book the Chairmaker's Workshop. The only adaptation you would require would be to make part of the blade and chamber parallel. His design is for cutting tapered tenons. If you choose the tapared route, remember that John Alexander's site has a plane for a home made reamer that really works.

Re: Round Tenon Cutter - Plans?

#5

Use a rounder...

Paul Kierstead

>I think what you are looking for is a rounder:

http://countryworkshops.org/rounder.html

If you poke around some, you should be able to find some plans, or even ask for some here. They are not complex in anyway and quite old in design. Some people use block plane blades in them.

Re: Round Tenon Cutter - Plans?

#6

Re: Round Tenon Cutter - Plans?

Pam Niedermayer - Austin, TX

>I thought about Alexander's reamer, too, and decided a reamer is much easier to make than a tenon cutter. Big difference between shaping an exterior, presumably solid, cone and shaping an interior cone.

Pam

Re: Round Tenon Cutter - Plans?

#7

Rounder/Dowel Maker. FOUND IT!

Joe Hurst

>Guys,

Thanks to everyone for their advice.

I'm still waiting on a few Underhill books, but as luck would have it, good old Nick included the plans for a simple rounder in his "Build it Better Yourself: Country Furniture" book. Back in 1988!

Nick, God Bless ya'! I hope you're still doing well.

Now if only he had included plans for a FROE, my life would be complete.

Simple minds, simple pleasures,

Joe