Plane Rehabbing *LINK*
Andy Lincoln,in Dearborn,MI
>Hi All,
After seeing some of the rehab work that Jim Reed has recently done, I decided to start rehabbing some of my planes and tools that are/were missing pieces and parts.
My first project was to replace a missing side plate on a Stanley #140.
Thanks to the well-equipped shop where I work I was able to waterjet out a new sideplate from stainless steel.
A quick trip into the welding shop and 2 stainless steel pins were tig welded in place..
A trip to the edge sander and some file work later the plane is all back together .

The plane at one time belonged to my grandfather and over it�s lifespan had also been dropped , broken and brazed together. I�m guessing the sideplate was gone before that but now, although not OEM parts the plane is back to a fully functioning plane.
Next on my list is a lever cap for a Stanley#40 scrub plane, as well as some sincere flattery of Rob Brophy's Bedrock Scrub Plane�.might just keep the waterjet busy.
Sorry for the pic quality. I�m using the camera phone I just couldn�t wait to get home before snapping pics and posting on WC.





