Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

slipping bessey clamps

Posts

slipping bessey clamps

#1

slipping bessey clamps

Les Winter


>Three of my Bessey clamps, the ones with the right angle red head, started slipping. These are probably 15 years old.

Figuring it was glue that got in the grooves of the shaft, I cleaned it up with a wire brush. No help. Then I noticed a hex screw recess in the underside of the head. 1/2 turn with a hex wrench, and all is back in order. Worked on all three. I don't know what it did, but it fixed the issue.

Re: slipping bessey clamps

#2

I believe that sets the cam...

Scott Burr in Ben Lomond, CA


>Aginst the clamp rod. If you had enough glue on the clamp rod it probably "got into the works". Take a peek on the inside and tell us what you see, please. I for one wonder about such things...

Re: slipping bessey clamps

#3

Re: I believe that sets the cam...

David Charlesworth


>Even a sixth of a turn, exposes sharp set screw teeth/tops of thread, which provides necessary grip.

This is the brilliant part of this design.

Should last forever.

David Charlesworth