Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Strange saw

Posts

Strange saw

#1

Strange saw

Mike G.


>I bought a rather odd looking saw the other day. No etch and no maker's mark. It's about a 8 or 9 tpi and has a handle kind of like a one man crosscut with no horns on it. The interesting thing about the saw is that it has a "built in square" riveted to both sides of the blade. The "square is stepped from 90* to 20*, 32* and 45*. the most accurate is the 45* bacause the blade is flat on the board to be marked and the least accurate is the 90* because the blade is about 3/8" above the board to be marked.

My question is; Has anyone else seen such a saw or have one that can tell me what I got? I don't think I paid too much for it, plus I also bought 3 Disstons from the same place. Four saws for 20 bucks. Pretty good for our neck of the woods.

Thanks, Mike G. in SC

Re: Strange saw

#2

Re: Strange saw *LINK*

Ken Martin in Sacramento


>You have a combination saw. I am posting a link to the combination saws on the Disstonian Institute. It doesn't sound like a Disston saw but a nice find anyway.


Disston Combination saws

Re: Strange saw

#3

Re: Strange saw

Don McConnell


>Hi Mike,

Does your saw look anything like the attached image?

If so, then it may be based on U.S. patent number 2,554,749, issued to Maurice E. Peeples, of Kingsland, Georgia, May 29, 1951. Unfortunately, the patent is not assigned to any manufacturer, but if your saw is based on this patent, we have a starting point for attempting to determine its likely time of manufacture, etc.

Hope this helps.

Don McConnell

Eureka Springs, AR


img

Re: Strange saw

#4

OT Don; Are You Guys Getting . . .

Tom Colligan


>. . . caught up yet or are you, and Larry, still 5 to 6 months behind your orders?

How did the summer course go at Mark Adams? Regards, Tom

Re: Strange saw

#5

Re: Strange saw

Mike G.


>Don,

That's almost exactly what it looks like. The only difference is in the handle. Your image shows horns on the handle and the handle on my saw is rounded with no horns. Thank you for the information.

Mike G. in SC

Re: Strange saw

#6

Re: Strange saw

Don McConnell


>Hi Mike,

Sounds as if we may well have a match between your saw and the Maurice E. Peeples 1951 patent (U.S.P.N. 2,554,749). The patent ("Multiangular Miter Attachment) claims actually have to do with the square/miter attachments to both sides of the saw blade, rather than any specific handle pattern. Incidentally, there is also a mention of rule markings along the straight back of the saw. Am I to assume your saw doesn't include this feature since you don't mention it in your description?

I've not made any real progress in attempting to track down a likely manufacturer of your saw, but find it interesting that about two years later, a Howard M. Peeples, also of Kingsland, GA, was issued a patent for a "Square with Two-Piece Handle" (U.S.P.N. 2,635,342). It focuses on a two-piece saw handle which includes a miter square capability, vaguely reminiscent of Maurice's patent.

Since Kingsland Georgia seems to be a fairly small town, I think it likely there is some relationship between these two patents and the people involved. Though it seems unlikely there was any significant saw making activity there. From what I've been able to unearth, members of the Peeples' family still reside in that area (H. M. passed away there in 1995), and there is a Peeples Street in town as well as a park named after Howard M. Peeples. So, the family was/is prominent enough that inquiries at the local library could well shed some light on Maurice and Howard and their activities.

Incidentally, for those who have occasion to travel South to Florida, Kingsland is just a couple of miles off I-95 at the last Georgia exit a few miles before crossing the bridge into Florida.

If you are inclined and have a digital camera, I would be interested in receiving a photo (as an e-mail attachment) of the critical aspects of your saw. While I'm not the steward for the current partial entry in DATAMP, I'd be happy to get the info and photo into the hands of the appropriate person in order to bring it up to date.

Quick aside to Tom. Yes, Larry and still have quite a backlog, and we continue to work through it on a daily basis. I feel the class at Marc Adams went well (though the final arbiters are the people who took the class), and we were pleased to make acquaintance with Stephen Proctor who was teaching there at the same time.

Don McConnell

Eureka Springs, AR