Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

OT - Plastic Cement / Adhesive

Posts

OT - Plastic Cement / Adhesive

#1

OT - Plastic Cement / Adhesive

Paul Brandley


>I have a 1992 John Deere LX172 riding mower and the pivot points on the hood have broken. The hood is made out of plastic and costs $450 plus, installed.

I would like to know what type/brand of adheasive, cement, autobody putty, etc. sticks to that plastic so I can build up the thickness at the pivot points to connect a new pivoting system.

I would appreciate any thoughts on what to use to fasten a new pivot and re-inforce the surrounding area. If anyone has done this I would appreciate hearing your solution. TIA, Paul

Re: OT - Plastic Cement / Adhesive

#2

Re: OT - Plastic Cement / Adhesive *LINK*

mikew


>Hi Paul, a relatively useful web site is at the link.

However, if I were making the repair, I would probably use some fiberglass woven cloth and epoxy to bridge the repair from the bottom.

Then on the topside, I would grind out a V-shape and fill in with ground fiberglass after the bottom is cured.

Take care, Mike


This to That--Gluing help

Re: OT - Plastic Cement / Adhesive

#3

Re: OT - Plastic Cement / Adhesive

Bruce, a MN Galoot


>I'd take it to an auto body shop that does plastic repair and see if they can plastic weld it.

Bruce

Re: OT - Plastic Cement / Adhesive

#4

Re: OT - Plastic Cement / Adhesive

Bill Houghton, retired fun in Sebastopol, CA


>Would it work to make a metal pivot point and bolt/rivet it to the hood instead? I've done several repairs of plastic bits this way, but it works only where the geometry permits, and some of the modern equipment, trying to look like it's ready to go on the NASCAR circuit, is too swoopy to make that easy.

It also tends to look, shall we say, country when you're done, so you do need to be comfortable with that look. Of course, for $450 I could buy myself quite a bit of comfort.

Re: OT - Plastic Cement / Adhesive

#5

Re: OT - Plastic Cement / Adhesive

Paul Brandley


>Thank you Mike! That is a good site to be aware of. I appreciate your taking the time to respond.

Re: OT - Plastic Cement / Adhesive

#6

Re: OT - Plastic Cement / Adhesive

Paul Brandley


>Bruce, thanks, I wasn't aware of this option. I plan to investigate it.

Re: OT - Plastic Cement / Adhesive

#7

Re: OT - Plastic Cement / Adhesive

Paul Brandley


>Bill, that is kind of what I had in mind, but I thought I may have to beef up the surrounding area first. I'm not really worried about the looks, as long as it isn't to bad. I'll get some JD green spray paint to hide as much as I can and it is down neer the front wheels. Thanks for the response.