Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Sandstone Grinding Wheel

Posts

Sandstone Grinding Wheel

#1

Sandstone Grinding Wheel

Patrick Gibbons


>I have a sandstone grinding wheel I would like to mount and use. I have been trying to find a plan or some info on making a frame with a flywheel and treadle to power the stone. So far no luck. Anybody have a new direction to lead me towards?

Re: Sandstone Grinding Wheel

#2

Re: Sandstone Grinding Wheel

Todd Hughes


>Don't think I ever saw one with a fly wheel as the stone acts as it's own fly wheel I guess, Pretty straight forward as to how to mount it.The stones axle should have a small arm that comes out and then that is attached to the foot treadle either with a shaft or piece of wood or even a wire and then the treadle is hinged at the back. When you push the treadle down it turns the stone and then when the stones keeps turning it pulls the treadle back up etc.....Todd

Re: Sandstone Grinding Wheel

#3

Re: Sandstone Grinding Wheel

thomd coralseacat@yahoo.au


>For inspiration look at some spinning wheel plans. The base is usually a wide sawhorse/basin deal and the axle sticks out to the side. I have a nice big stone but I haven't tried mounting it yet. I find it hard to believe that it wouls be of any practical interest, but then that kind of thing can be diceptive.