Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

New tool bench -in progress

Posts

New tool bench -in progress

#1

New tool bench -in progress

Todd O. Cronkhite Maine Native now in Jax Fl.


>OK, in an attempt to try to clear up what I ave been jabbering about concerning my old bench interferring with my new bench, jere is a shot of the frame of the new bench butted up against the old bench. Probaby could be a better shot, but I think it'll surfice.

The 2x4 that is laying across the top of it is to signify the height of the finished top. As you can see there is quite a height difference, about 5.5" to be exact. If and when working on this end of the new bench you can see where the interference would come into play.

I know what's gonna happen in the end, and that's to be lower the old bench, which I have 98% talked myself into doing.

I'm also going to shorten the length of the new bench by roughly 2 feet. By doing this I will crate a gap between the bases of the old and new bench(the tops will but together) and in that gap I can put a small chest of a few drawers. Also, I will create a space to the left of the new bench which I can also put a stack of drawers. I fiqure by lopping a few inches off of the bench and ganing a significant amount of tool storage space is a good trade off.

Hopefully I'll get alot done this weekend and be able to post some clarifing pics. I forsee ending up with at least a 10' long benchtop, which should be plenty, and a vast amount of new tool storage space. :~)

Todd O.


img

Re: New tool bench -in progress

#2

Here's you other 2%

Raymond in Trenton, NJ


>Todd-O,

Sounds like a plan. I also like your decision to put tool storage between the two (extra top). Good luck this weekend.

Raymond

also - thanks for the pic.

Re: New tool bench -in progress

#3

Scrap it All!!

Todd O. Cronkhite Maine Native now in Jax Fl.


>Gosh, I can see the eyes rolling now, but I've changed my mind about the whole new bench idea, I have a new idea, and I'll tell you why in a weak attempt to prevent the lynch mob from coming after me.

New Plan:

1)Lower current bench to more comfortable height.

2)Shorten base of current bench to allow roughly 1' of top to over hang on each end.

3 On left end of top install my old metal WWing vise.

Why:

1)I feel that the current top that I have is plenty big enough for my needs.

2) I suddenly came to the realization that I am asking my bench/es to perform double duty--be a work surface and provide tool storage. The problem with this is that using the bench for tool storage is too confining, so in the 7'space where the new bench was going to go I can instead build a free standing bank of drawers from floor to ceiling if I so desire,instead of the measly space that the bottom of the bench would provide. Boils down to better space utilization in my estimation.

Dang Demons, but I've got 'em licked now!

Be on Stand-by for pics! I'm really stoked now.

T.O.

Re: New tool bench -in progress

#4

I like to get intimate with my bench

jim reed @ tallahassee


>that means feet underneath and knees under the top. There are a few tool boxes under my bench and they get kicked around all the time. If I am in the middle of a big project they get moved out. That is my opinion--a bench is a bench and a storage unit is a storage unit. Don't get ambitious and build a second rate bench. Bench storage is one of those bright ideas that rarely works out.

Re: New tool bench -in progress

#5

Re: Nice Wall!

Thom D


>I don't know... going down five inches is like the guy who trades a tired looking, cookie baking wife for a trophy wife: You just gotta believe there will be 3rd wife along soon. Why not slap your current top on your new height base, and at least try that out for a while.

I do feel sad whenever a bench building project gets put on hold. My desire is to pave the whole floor with benches and then just start all over again on top of the first lot.

Re: New tool bench -in progress

#6

Great idea Tom!

Raymond in Trenton, NJ

Re: New tool bench -in progress

#7

Re: Great idea Tom!

Todd O. Cronkhite Maine Native Presently Away :~(


>Yeah Thom, I thought of that, but than fiqured that if I discovered it to be a whisker too low I'd just put it on blocks to raise it a little.

I'm so committed to my new plan that I already have my old bench all stripped down to it's bones in preperation for the modifications. Would of gotten more done had I not had to come to work tonight. Ahhhhhhhh well, no matter, got my usual 3 day weekend to work on it.:~)

Todd O.

Re: New tool bench -in progress

#8

Re: I like to get intimate with my bench

Todd O. Cronkhite Maine Native now in Jax Fl.


>Bench storage is one of those bright ideas that rarely works out Jim, I have finally come to this realization, and agree 100% with you. At one point the drawers beneath my bench was adequate to hold all of my tools, but I have long out grown their limits now, so it is more practical to have a seperate primary tool storage unit.

Live, Accumulate, Learn.

T.O.