Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Any body go to Hillsville, NC?

Posts

Any body go to Hillsville, NC?

#1

Any body go to Hillsville, NC?

bill tindall


>Normally this yearly extravaganza is 100's of booths of ugly glass ware and a few tools. This year there are dozens of booths with woodworking tools and several extensive booths exclusively woodworking tools. Hint, the bargins were not in the specialized dealer's booths( one could get a roll of the desirable Stanely chisels for only $350; makes LN look cheap). Also lots of guns this year in all the lots. My favorite was a Belgin 410 hammered double that weighed in at 2 3/4 pounds. Cute as it could be but I don't need it. Got one near-new round from an English dealer and some nice chisels and gouges. Passed on some nice Stanley planes and a cheap router plane as I don't need any.

Re: Any body go to Hillsville, NC?

#2

Did They Move It?

Bob Hutchins in central TX


>When I was there last many, many years ago it was in Virginia. Not too far north of the NC line and close to Mayberry - uh, Mount Airy! Is that the one you're speakin' of, Bill?

BobH

Re: Any body go to Hillsville, NC?

#3

Ooops, that's VA , not NC

bill tindall


>But you can see NC from there.....

Re: Any body go to Hillsville, NC?

#4

Tell Aunt Bea "Hey"

Bob Hutchins in central TX

Re: Any body go to Hillsville, NC?

#5

When? Where in Hillsville?

Pat Evans


>Is this still ongoing?

Re: Any body go to Hillsville, NC?

#6

yes till Sunday

bill tindall


>I am told many vendors discount on Sunday stuff they have left. I have always gone Friday, so this is 2nd hand info. The most of the tools are in VFW lot and field across from it. There are a few tool dealers in Bowmantown lot down the road. The Mex resturant in strip mall on hill in middle of town is excellent.

Re: Any body go to Hillsville, NC?

#7

Re: Any body go to Hillsville, NC?

Todd Hughes


>I went down a few years back and have to admit it is a pretty amazing event, basicaly they close the town down and venders set up everywhere.We went down for one day and had to come home the next one so never saw it all. I did see lots of tools though most was very rough or over priced but I still managed to buy pretty well. One downside was that we had to park a long way off up a steep hill so I soon got loaded down esp. since one of the things I bought was a big heavy fire back. Luckly I found a friend of mine that was set uo so could leave it with him. Bought a rough Stanley no. 4 that did have a nice Bedrock lever cap on it somehow. After trying unsuccesfully to buy just the cap I got the hole plane, took the lever cap and blade out and walked over to a trash can and tossed the rest much to the amazement of the vender who sold it to me.

.....Was funny but I went down with this crazy one eyed gal I met the week befor.On the drive down she asked to drive my car and I said sure not knowing any better, next thing I know she is driving 100 mph [...really 100 mph !] swerving in and out of traffic and I am convinced I am going to die! I tied to get her to stop but nothing doing so finaly I had to throw her clothes out the window to get her to pull over..... I drove the rest of the way ........Todd

Re: Any body go to Hillsville, NC?

#8

These tales...

woodburnbob


>clearly need photo-documentation. Would you please get a video camera and start putting together some 20 minute installments. Like the old Saturday morning serials. Fury. Captain Midnight. Cisco and Poncho. That sort of thing. Put them on Ebay for $20 or so and I'll buy at least one. "Todd goes for a drive with the one-eyed gal", "Bargain hunting with Todd", "The secret spots off the road", that sort of thing.

Re: Any body go to Hillsville, NC?

#9

Thanks Bill

Pat Evans


>I appreciate your response and your emails. Didn't make it to Hillsville though. The wife had other ideas about how today should be spent.

Re: Any body go to Hillsville, NC?

#10

And don't forget

Bill Houghton, foggy mornings in Sebastopol, CA


>"Todd prunes his trees."