WoodCentral Forums

Est. 1998 — 27 years of woodworking knowledge

Well Damn and Blast--It's Over

Posts

Well Damn and Blast--It's Over

#1

Well Damn and Blast--It's Over

Todd O. Cronkhite Maine Native Now in FL. :~(


>After a 30 day "vacation" I just reported back to work an hour ago. :~( Will be nice to get a paycheck again tho. :~)

I must say that even tho I didn't get to go anywhere-other than Lowes that is--or get to do any work on my planned on new workbench I did rather enjoy myself getting much done to the house. I got way more done that I had inteneded or even expected, but hey, it all needed doing, so I do'ed dem.

I did manage to get my garage floor sheathed with cheap plywood, and using recommendations from Islanders I now have a 4 mil vapor barrier plastic sheeting under it AND some of that this blue construction foam sheeting. This sheeting unto itself made a tremendous difference in the "feel" of the floor. I also manage to get the inside of my garage door filled with styrofoam, which I can tell already will make a huge difference during the cooler months.

The Bright spot of this whole vacation without a doubt was the vist I had from our veryt own Raymond Wendrzycki! Yup all the way down from Jersey--rumors have it that he is the Jersey Devil, but they are unconfirmed. Unfortunately I felt that I was patheticaly underprepared for his visit as I was so engrossed in doing house jobs that I failed to prepare for a nice workshop visit. We did haowever spend an evening watching a couple of WW videous that you couldn't pay me to watch again. I'd rather watch golf wearing a frilly penny and pink high heels in my front yard that have to watch them again, but ahhhhhhhhhhhh well, so it goes. Sure was nice to see Ray again tho and we did have share a few cold ones and a bunch of laughs---as usual. Ray is a Top Of The Line and presented me with a cool miniture Maine State flag, which I have temporarily hung over my washing machine. Thank you so much for that Ray I truely love it. Next time you come down I am fully set up for some shop time together now. Man, I wish you had come two weeks later.

Sad part of my vacation was yesterday my cat SweetHeart was killed by a car. She was such a Beautiful and Loving cat. She was forever grooming and loving on her sisters, and was as her name implied a true true SweetHeart. I will long, long miss her. I buried her in the backyard. Its hard to dig a grave with tears in your eyes.

Now that I'm back to work perhaps I'll fet more Island Time in, the Taskmaster that I worked for while on vacation allowed almost none.

Todd O.

Re: Well Damn and Blast--It's Over

#2

Re: Well Damn and Blast--It's Over

Moses Yoder in White Pigeon, MI


>Have to say that it just wasn't the same around here without you. I actually think it was better. Although I did miss you a little bit. You better do a search and look at all the bad things Ernie was telling us about you while you were gone.

Re: Well Damn and Blast--It's Over

#3

workbench?

Dave Thompson


>Too bad about the vacation being over.... ;-)

That's the second time I read about your new workbench project... I'm surprised, since it looked like you put in a lot of time in to your current workbench. Or are you just working on a second one for other types of work?

Re: Well Damn and Blast--It's Over

#4

Re: workbench?

Todd O. Cronkhite Maine Native Now in FL. :~(


>Yeah Dave, you got it right, it's to be a second bench. the one I have now is too high for many processes. I had at one point considered modifing the one I posted pics of, but I just can't bring myself to do it as at it's current height it is good for some operations, and doubles as a workbench in general for projects other than woodworking.. If worse ever came to worse than I guess I'd have too, but until then No Way.

T.O.

Re: Well Damn and Blast--It's Over

#5

Re: Well Damn and Blast--It's Over

Frank D. in Montreal


>Hey Todd,

Glad you got some stuff done around the house...that will certainly free up a little woodworking time sooner or later. Sorry to hear about your cat, I know how that feels too and it's no fun.

Re: Well Damn and Blast--It's Over

#6

Re: Well Damn and Blast--It's Over

Brad in Ottawa


>'Bout time it's over! You were making the rest of us look bad with all that you got done. Next thing you know my wife will hear what Todd did on his vacation and wonder why I couldn't do a fraction of what he did!!!

Brad

Re: Well Damn and Blast--It's Over

#7

They sneak in on us, don't they?

Bill Houghton, foggy mornings in Sebastopol, CA


>Sorry to hear about your kitty. They do have a way of sneaking in and settling down in our hearts, don't they?

Glad to hear your time was otherwise so productive.

Re: Well Damn and Blast--It's Over

#8

Jack Guzman from Maine

Re: Well Damn and Blast--It's Over

Jack Guzman from Maine


>Condolences on your cat Todd. Vacations have a different meaning for woodworkers.Some people actually do nothing.Glad you got alot of honey-do's out of the way.Welcome back.---Jack

Re: Well Damn and Blast--It's Over

#9

Re: Well Damn and Blast--It's Over

Ernie Miller


>Sorry to hear about you Kitty. it will be nice having some one to kick around here. most of the people are bigger than me so I leave them alone.

Re: Well Damn and Blast--It's Over

#10

Boy o boy...Todd

Scott Burr in Ben Lomond CA


>Sure had your up's and downs throught this last month eh...

Glad to hear you got your garage...err... shop done. All my kitties 'ceptin Misha the barn cat stay indoors now. It's way to hard on me and LOML when we lost one.

After being laied-off for 3.5 months I can honestly say re-entery is difficult...

Scott starting week #2 on the new job.

Re: Well Damn and Blast--It's Over

#11

Sorry to hear about your cat!

Derek


>Glad ot hear you enjoyed yourself!!!

What are you planning for your workbench? I'm working on one myself - though I've had almost no time to do so for quite a while now. :>(

Re: Well Damn and Blast--It's Over

#12

Re: Sorry to hear about your cat!

Todd O. Cronkhite Maine Native Now in FL. :~(


>Derek,

The bench is going to be as super simple as I can make it. 4 legs, 2x4's one edge for the top, drawers beneath, one old WWing vise attached at the left front edge, and that is only because I have had it kicking around since 1987 and would like to put it back into use. Total demensions other than the height are yet to be determined. I am 70" tall and the top will be 32" from the floor, which corresponds with my palm when my arm is straight down my side. If it proves to be too low I'll put it on blocks until it is right. Easier to make it taller than shorter once it is completed thinks I.

Todd O.

Who hopes to win the lottery tonight so I can buy a place probably in Maryland, with many many many acres for my cats to roam without fear of automobilies. Friggin' autos anyhow.

Re: Well Damn and Blast--It's Over

#13

Thanks for the visit and sorry about SweetHeart

Raymond in Trenton, NJ


>Hey Todd-O,

I'm sorry to hear about the loss of your cat. It's amazing what a big hole such a small animal can make.

What did you mean by "pathetically underprepared" and "I failed to prepare for a nice workshop visit". It was a great visit. I sure had a lot to look at and talk about, and I had a great time. Ya know, we are never as prepared as we want to be for something, so stop fretting about it. We actually spent about 2+ hours in your shop (that felt like it went by in 20 minutes), and that doesn't count the short bit before lunch on Friday.

Everyone, Todd-O's much too modest. He's a very gracious and welcoming host and all around nice guy. His shop was in great shape and showed all the signs of active use. Much cleaner and better organized than mine, but then most people's are :o) If you ever get the chance to meet him, don't pass it up. He wouldn't let me get away empty handed and gave me a small Arkansas stone. Thanks for that!

Uh, about those videos � if I remember correctly, that was your idea brother. Actually, one was pretty good. I know I'll watch Todd Herli's - Making a Hollow & Round again, but not all the way through. In bits and snatches (and over and over) as I try to make a pair. I'm sure his intent wasn't to make a 'normal sit-down-and-watch-it-through' kind of video. (Ernie, Todd-O was actually able to sit still through it. Did start to fidget pretty good in the second though :o)

Thanks again for the hospitality and for spellin' my name right :o)

Raymond

"... wearing a frilly penny and pink high heels in my front yard"

Todd-O, that's just way too much data!

👍 This page answered my questions

Your vote helps other woodworkers quickly find the answers and techniques that actually work in the shop.