Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Whats New at LV!

Posts

Whats New at LV!

#1

Whats New at LV!

Jim Shaver Oakville, Ont.


>Hi,

I don�t know if you are like me, but I frequent the Lee Valley site on line and often check out the What�s New feature. This morning I can see that the good design folks at Lee Valley have had a great summer coming up with some new offerings, specifically for chair makers. Check out the new hand tools at the following�..simply wonderful!

http://www.leevalley.com/wood/page.aspx?c=1&p=54886&cat=51&ap=1

http://www.leevalley.com/wood/page.aspx?c=1&p=54888&cat=51&ap=1

http://www.leevalley.com/wood/page.aspx?c=1&p=54884&cat=51&ap=1

http://www.leevalley.com/wood/page.aspx?c=1&p=54865&cat=51&ap=1

http://www.leevalley.com/wood/page.aspx?c=1&p=54864&cat=51&ap=1

Take Care,

Jim

Re: Whats New at LV!

#2

Re: Whats New at LV!

Rob Lee


>Hi Jim...

Lots of pen stuff for you.... :)

As for the Veritas products, it's all due in the next week to four weeks.... since we only print once per year, it's tough for the machine shop to get all the tooling done at the same time...

On top of that, we busted up a mill last week, which has us scrambling a bit.... the fingers on a tool changer got bent, and every time it put a tool back, it smashed the carousel....

We've put the items up on the web as the US catalog is in the mail now (takes more than a week to arrive), and the Canadian catalogue goes next week. This year, they Canadian version goes in three parts - Main, woodturning, and books... (the US version has all three). Have to do that as there's a 500g limit in Canada...

Hardware follows in 3 weeks or so.... another 546 new items there.... been a busy summer...!

Cheers -

Rob

Re: Whats New at LV!

#3

500g limit in Canada

Jim Shaver Oakville, Ont.


>Hi Rob,

Yeah, my postman loves it when the New LV catologs come out, I think he has half my street!

I also thought that the new dt chisels looked good, what can you tell us about them?

Take care,

Jim

You know, you have replaced the Christmas Eaton's catolog as the Wish Book some time ago.

Re: Whats New at LV!

#4

Re: Whats New at LV!

arw01


>What determines if you get a new catalog in the mail? I am assuming that the FULL catalog is coming? The last little flyer didn't have much in it.

Alan

Re: Whats New at LV!

#5

Steve Kubien

Re: Whats New at LV!

Steve Kubien


>I've had the pleasure of using the Pro tapered reamer. Nice tool but in fairness, I cannot compare it to any other make because this is the first I've used. Today is a day off for me (soccer tournaments for the 4 and 6 year old). Monday it will be back to finding homes for all these goodies in the warehouse.

Have a great weekend,

Steve Kubien

Re: Whats New at LV!

#6

Arrrggghhh!!!

Paul Kierstead


>Just yesterday I bought a beading router bit (a bit much stuff to do for a handplane) and was quite unhappy with the size of the quirk. Now those #55 bits come along and look like a *much* better sized quirk. On the upside, I hadn't opened the router bit yet so will feel fine returning it....

Re: Whats New at LV!

#7

Oh No...

Scott Burr in Ben Lomond, CA


>Looks like LV going to get some of my first paycheck from the new job!

Re: Whats New at LV!

#8

Re: Whats New at LV!

ThomD


>Six weeks of chiarmaking wind up this summer next wednesday. So this stuff is going to have to be good to be worth it at this late date. The rest of you - Enjoy!

Re: Whats New at LV!

#9

Re: Whats New at LV!

ThomD


>Reamers are priced to move those are good prices if you want a fast tapered reamer!

Re: Whats New at LV!

#10

Eh?

Bill Houghton, foggy mornings in Sebastopol, CA


>Did I miss a reference here? Is LV selling irons for 55s?

Re: Whats New at LV!

#11

Almost...

Paul Kierstead


>They are selling direct router bit equivalents of 55 irons, apparently for reproduction work. However, most router bits are not so delicate as planes (for example, heavy large quirks) but these ones appear much more so as they try to be direct replica's. Now this is a little out of place on this forum, but an interesting idea nonetheless.

Re: Whats New at LV!

#12

Jim in Burlington Ont.

Rob Lee your too much

Jim in Burlington On


>It's quite a chore driving to LV and carrying home big bags full of stuff every september. Those shaves/devils look sooo sweet.

Re: Whats New at LV!

#13

Simple solution

Bill Houghton, foggy mornings in Sebastopol, CA


>You can just drive there, buy stuff, have them pack it up, and ship it to me instead - no need to carry it back in your car that way.

Re: Whats New at LV!

#14

Re: Arrrggghhh!!!

Rob Lee


>Hi Paul -

Those bits come from a suggestion made by Bill Tindall (on the noisy board)... to give credit where credit's due!

Cheers -

Rob

Re: Whats New at LV!

#15

Re: 500g limit in Canada

Rob Lee


>Hi Jim -

The dovetail chisels are just a good quality chisel.... of course, not as good as the ones you have!

Cheers -

Rob

Re: Whats New at LV!

#16

Re: Whats New at LV!

Rob Lee


>Hi Alan -

Yours is in the mail....

We mail the main catalog only to customers who have bought something in the last 12 months, subject to a somewhat complex to explain threshold criteria... has to do with how much, how often, and what type of products...

US catalogs should start arriving later this week (prices change on Friday!). Any price drops have already been put into place...

Cheers -

Rob

Re: Whats New at LV!

#17

I Think It's a Brilliant Idea!

Jim Shaver Oakville, Ont.

Re: Whats New at LV!

#18

Re: Whats New at LV!

mikew


>Gee, Rob, I think I've been a bad customer this past 12 months...but I promise to turn it around if you send me one ...

'Specially some of the reamers and chair widgets...

Take care, Mike

Re: Whats New at LV!

#19

Re: Whats New at LV!

Rob Lee


>Mike -

I think you've been mailed too....but can't tell 'till we populate the mailing history file (this week)...

We'll always send a catalog on request (by phone, or through the website)...

Cheers -

Rob

Re: Whats New at LV!

#20

I was under the impression....

Jamey Amrine


>...we were going to be seeing parallel spoon bits as well. Those coming along soon too?

Re: Whats New at LV!

#21

Re: Whats New at LV!

Tony Zaffuto


>Rob,

Will price increases be posted and placed into effect on Friday or will you post price increases and then have them take effect a week or so later?

Got several items "I need" and as they are of the "high iron content" (low angle jointer plane and bench vise), I suspect will be ripe for a higher price, given the current cost of raw materials and gasoline. Unless, of course, you figure pricing like Red Green does!

Thanks,

Tony Z.

Re: Whats New at LV!

#22

Re: Whats New at LV!

Rob Lee


>Tony -

If were you... I'd check out now....!

It's not just material costs - it the USD which has lost a lot of value this year...

The US market in general will see price increases on the order of 6-8%...it really depends on how much vendors want to pass on... many have been eating large losses for awhile now.

The Canadian market will see generally flat prices, with the exception of things like brass hardware... and a bunch of products dropped in price (for the third year in a row, I might add)...

Rob

Re: Whats New at LV!

#23

Re: Simple solution

Brent Smith in Montreal


>Even easier.....call and have them ship it. Let the mailman do the heavy lifting LOL

Re: Whats New at LV!

#24

Re: Whats New at LV!

Brent Smith in Montreal


>AW Geez.......I haven't even caught up with everything I want from last years catalogue yet. LOL

Re: Whats New at LV!

#25

Re: I was under the impression....

Rob Lee


>Hope so...

We have one size under control, and have released the others to the production stream. Hate to sink the money into tooling all of the sizes, until we're confident on the first one...

That means it'll probably be January... but we still can't confirm.

Cheers -

Rob