Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Weekend frolics with a #39

Posts

Weekend frolics with a #39

#1

Weekend frolics with a #39

Jim Reed @ Tallahassee


>The project was to make a cutter for a #39 1/4" dado plane. Those of you in the know understand that this is a real gnarly piece of metal which must be made with much precision. There are several angles to hit with little room for error. If done right, you will pull some of the prettiest shavings known in all of planedom. I could't wait to dig into the heat treating batch and see how the little devil made out. I did some sharpening, some honing, and cut two of the prettiest little curls ever!! Here is the proof:


img

Re: Weekend frolics with a #39

#2

Re: Weekend frolics with a #39

Joe Rogers, Northern Virginia


>Not fair!

I put you through all that trouble and you post those pretty curls and torture me even more!

Now I can't hardly wait even though I was being patient:-)

Beautiful...and mine...all mine!

JKR

Re: Weekend frolics with a #39

#3

The mailman sez...

jimreed@tallahassee


>to check yer box. The missus & I went to PO this morning at 9am and got it in the mail. Then it was off for some sausage biscuits and coffee. Now I need to sharpen up one of the 7/8" and see some big curls.