looking for designs for a sawtill!
Roy Hennagir
>I am looking for pictures or designs for a sawtill!
Thanks in advance!
Roy
Knowledge You Can Build On — Est. 1998
looking for designs for a sawtill!
Roy Hennagir
>I am looking for pictures or designs for a sawtill!
Thanks in advance!
Roy
Search threads
Bill Houghton, Sebastopol, CA
>both in the active threads and on the archives. This comes up regularly, and you'll find some nice designs.
Re: looking for designs for a sawtill!
Wendell @ Murphy, TX
>Try this:
http://www.shavings.net/sawtill.html
The shop shots here on Woodcentral have a picture of Dave Anderson's version of the above design:
http://www.woodcentral.com/shots/shot485.shtml
Wendell
Here's mine...
Scott Burr in Ben Lomond, CA
>A modified version of the galoot till.
That particular picture's a little hard to see
Bill Houghton, Sebastopol, CA
>Scott, did you maybe forget to put in the pic or the link?
Doh! Let's try this again shall we...
Scott Burr in Ben Lomond CA
Ugliest sawtill
Dave Thompson
>Some day I plan to make a beautiful one like Scott's.... in the meantime this is mine.
To it's credit, it took me an hour or so to make, and the dimensions were determined by the size of the scraps I had lying around at the time. ;-)
It's just two boards with 45 degree angles cut through them, and then screwed to a backer board.
enjoy,
Dave
Thansk Kevin...
Scott Burr in Ben Lomond CA
>Yours ain't to shabby either!
Re: Ugliest sawtill
Roy Hennagir
>Dave mine are piled in a cardboard box! Thanks for all the pics!
Re: looking for designs for a sawtill!
Roy Hennagir
>Mr Burr,
I am well on my way to a saw till. I wish I would have seen your earlier post and pictures going through the process. I am approaching the same project as you but I interpreted the plans from the Galoot a little differently. Perhaps I have just made some fine hand crafted firewood. I didn�t quite think thru the back panel like you did. No glue yet so there is hope. Those tail doves on the side are a little tough to do and are quite delicate. Not sure I will be doing that again.
Re: Thansk
Kevin French, Antrim, NH
>But it's FULL. I need 1. another, 2.to swap out saws or 3. Stop buying/pickup saws.
Re: looking for designs for a sawtill! *LINK*
philly
>I made a saw till not too long ago. I've put step-by-step photo's on my web site.
Remember, you can NEVER make it too big! ;)
Cheers
Philly
http://www.philsville.co.uk/saw_till.htm