Estate sale gloat (long)
Bill Houghton, Sebastopol, CA
>OK, in response to Burrly demand, here's the report:
Nine carving chisels, most of which appear to be Addis, from reading through the grunge (seven of them in a bag at $25, plus two others loose at $1.50 - this particular estate sale company is generally decently priced, but kind of erratic in pricing - if they'd just priced the chisels in the bag at the same price as the loose ones, I'd have saved $10).
Two mortise chisels (yahoo! Been watching for a while), one 5/16" D.R. Barton, and one 1/8" unknown, both socket type. The D.R. Barton is truly nice and shiny. Since I already own a 1/4" mortise chisel, when Scott gets his round tuit inventory up and we talk about the about 1/2" one he's got (why, no, Scott, this isn't a hint - just mentioning...), I think I'll have a more or less complete enough set.
a Stanley all-metal miter square (oxymoronic, but that's what they're called), $10 and not really necessary, but the first one I've ever seen in the wild - in fact today had a lot of things I'd never seen in the wild before - and it goes with my Stanley all-metal try square, so how could I turn it down?
One of those funny handle-with-a-chuck and a full set of bits for it, by J.S. Fray. Probably no use ever in my life, but for $3...
The auxiliary handle for a one-man cross-cut saw to replace the handle my son left out to rust years back, $1.
What appears to be a slotted-saw-nut screwdriver bit to fit a brace, free.
A 2" bench plane iron, not sure of the brand; the blade from a flat-pattern English screwdriver big enough that I can make a bench plane cap iron screwdriver from it; and a little square texturing punch, all for $2.
And the gizmosity prize goes to: a Goodell Pratt wheel marking gauge with a very interesting fence, pictured below in a very murky scan-o-vision pic. In case you can't figure it out from the picture, the fence is curved, kind of like holding your first finger and thumb as far apart as they'll go and then running the beam through the knuckle of your first finger at the palm. It appears to me that, if you're running the fence against a straight edge, the two fingertips register straight; if against a convex or concave edge, the two fingertips give room for the curve and register the beam at the curve's radius. $8, but I picked it up and put it down twice, then went to the credit union for $$, and when it was still on the table on my return, I knew it was meant for me.
Left the brass-faced panel marking gauge - $25 more was past my budget. If I could just figure out how to go down there on Sunday, I'd buy it at their half-price off, if it's still there.





