MHG Chisels
Terry Quiram
>I picked up a Hartville Tool catalog at the symposium and see on page 3 an add for MHG chisels. I am wondering if anyone has any experience with these tools. What is your opinion of the quality?
Thanks,
Terry
Knowledge You Can Build On — Est. 1998
MHG Chisels
Terry Quiram
>I picked up a Hartville Tool catalog at the symposium and see on page 3 an add for MHG chisels. I am wondering if anyone has any experience with these tools. What is your opinion of the quality?
Thanks,
Terry
Re: MHG Chisels
Tom Sontag - St. Louis
>I have some. I am far from a hugely experienced chisel-comparer guy, but I think I need to try a higher angle on mine. The cutting edge has a tendency to fold over when used for chopping. I am currently using the delivered angle which I believe is 25*. Maybe it is less.
The steel appears to have some of those unpronouncable alloys, (molyb-something etc.), so I am thinking that they will hold an edge because it took a while to flatten backs etc. Ergonomics are fine since they are longer and thinner than my japanese chisels; they fit my Tormek grinding regime easier.
I reach for my japanese chisels first. But ask me again after I regrind.
Re: MHG Chisels
david.marcus.brown
>Good price, decent steel, curious ergonomics. I've got a set of four that I've modified. First, I sanded off the heavy coat of laquer. Then, there's that hooped stub at the end that you're supposed to beat on. I cut off the stub and rounded the end with a rasp and file. That improved the balance and stopped the hoop from pinching the skin between my thumb and forefinger. They definitely need to be honed to at least 30*.