Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Going to Eugene, OR, Where to go

Posts

Going to Eugene, OR, Where to go

#1

Going to Eugene, OR, Where to go

Doug Littlejohn


>for old tools??

I am going to be up there the first half of Sept and am looking for any decent places to look at (or buy??) Galootish stuf??

Anybody know of any good places to visit in the area??

TIA,

Sherwood

Re: Going to Eugene, OR, Where to go

#2

Re: Going to Eugene, OR, Where to go

woodburnbob


>Good question. I'll be interested to read the responses.

No doubt Eugene has it's share of antique malls. I vaguely recall a reference or ad for some "old tools" kind of store in Eugene a few years ago, but wouldn't know how to search for it now, if it still exists.

Eugene is one of the official craigslist sites and thus there is a "tools" section for Eugene. You should put an add in there asking for places to go and see tools.

If you are leisurely driving up from California, you might consider taking a diversion off I-5 when you get to Medford. Jacksonville, west of Medford, is an "historic" town and perhaps a magnet for shops with all things old and cast iron.

Pull off when you get to Grants Pass. It's pretty small. I've seen quite a few nice Ebay Bedrocks come from there over the years and have always wondered why that would be. I'd guess it would take 15 minutes to tour the Grants Pass downtown...looking for antique shops and malls, and such.

I'd be pretty interested to see your list of notable tool sites in Southern Oregon at the end of your odyssey. Hope you post something.

Re: Going to Eugene, OR, Where to go

#3

Re: Going to Eugene, OR, Where to go

dave caudill


>You know I lived in Eugene for a while and still visit and must say I'm a little lost for suggestions. As was mentioned there are antique malls and such and a little north of Eugene is Coburg and it has a lot of antique stores to choose from. Too bad you aren't coming up sooner you could go to the Best in The West in Portland. Its the big tool show and sale that the Pacific Northwest Tool Club puts on and it is a really nice show. Most of the big names in tool sales and all show up and we have a great auction and lots of tailgating. The usual tool show events and activities. It is the weekend of Aug 24-26.

Also though there are a lot of tool club members in the area and you could possibly hook up with some of them to see their personal collections and items they might have for sale. There is a dealer in the Eugene area that sells some nice local woods and others. Also north about an hour is Northwest Timber in Jefferson Or. I have yet to get there but hear good things about their selection of figured woods. You can check out their website by Googling Northwest Timber.

If you want to write me offline I'll talk to you about a club member who you might want to visit in the Eugene area. I could contact him

if this might be something you;d like to do. He has quite an extensive collection of very nice tools and lots of other stuff.

Dave

Re: Going to Eugene, OR, Where to go

#4

Re: Going to Eugene, OR, Where to go

Dan in Wasilla, AK


>Hey Doug,

I used to live in Oregon and still go down there about once a year, and I am always on the lookout for tools as they are few and very far between up here in Alaska. I spent a few days in Eugene earlier this summer and came up pretty empty on the rust hunting. I did find a place just east of I-5 called "Trash and Treasures" that had a tools section with some things of interest if I recall correctly. Also, the guys at Woodcraft mentioned an antique mall in Coburg that they thought might have some tools (could be the same one Dave mentioned - I never did track it down so no clue on the goods...)

I also spent a day last year digging in Grants Pass. I too had noticed the occasional eBay stuff coming from there, and being an old timber town I had high hopes. But they were crushed... a lot of antique/junk stores but very little of note. I think there was one place called "Dan'l Boone's Trading Post" or some such, that did have tools, but I don't remember buying anything so they must have been on the pricy side. Could be worth a look...

Not much information, but I hope it helps. Good luck - hopefully you will do better than I did. Looking forward to hearing about your finds.

Dan

Re: Going to Eugene, OR, Where to go

#5

Thanks all

Doug Littlejohn


>Last year we spent a couple of days over on the coast and did some sightseeing, etc. I stopped at several 'Antique Malls or Shops' but there was very little along the lines of rust. I did manage to snag a real nice hand grinder for $25, no great deal but certainly fair.

I'll check out the Coburg place and Dave, I'll reach you offline later.

Thanks all, once I return, I will post a report with what I was able to find (hopefully it won't be just 1-2 sentences).

Sherwood

Re: Going to Eugene, OR, Where to go

#6

Re: Thanks all

john l. blue


>Johnny Cash sang "on Saturday night you go to Eugene, Sunday mornin' yer pockets are clean".