Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Custom engraving

Posts

Custom engraving

#1

Ellis Walentine

Custom engraving

Ellis Walentine


>I happened to watch a fellow named Valdemar Skov engraving a bronze block plane today. He was using a little pneumatic engraver, and I was dutifully impressed. I didn't get the make and model of his engraving tool, but I wouldn't mind playing around with one of them. Sure looks easier than using the old style push gravers.

Anyone here use this type of engraver? (Sorry you can't see it in the photo. It's so small, it's completely hidden in the palm of his hand.)

Ellis Walentine, Host


img

Re: Custom engraving

#2

Re: Custom engraving *LINK*

mikew


>Google is your friend. On such hit...

Take care, Mike

who's thought these tools would be fun...


http://www.airgraver.com/index1.htm

Re: Custom engraving

#3

Re: Custom engraving

Andrew F in Australia


>Hi Ellis,

It could either be the one that Mike's posted, or a small air-powered die grinder - they take Dremel bits at about one third the price for the handpiece compared to the dremel.

Cheers,

Andrew

Re: Custom engraving

#4

Lindsay Airgraver w/palm control...

David Barnett - SW Florida


>...is the way to go, in my opinion, although I still hammer and hand-push mine. Not for much longer, though. Most of my gravers are used for setting stones but with my background teaching historical scripts, I'm switching to air power this year.

Mike's right. Check out the bulino and inlay work on Steve's site. Not too shoddy.

Re: Custom engraving

#5

Check out GRS, too... *LINK*

David Barnett - SW Florida


>They make the engraver's vise clamping that bronze plane (I use their GRS Magnablock on a special turntable pedestal that keeps things under my microscope). GRS has tools with crossover potential for handtool makers. I have several of their benchmates, too. Great stuff for workholding, including their new thermoplastic.


GRS

Re: Custom engraving

#6

Re: Custom engraving *LINK*

Frank Mutchler in Colorado Springs


>Engraving is a fascinating process. I found that the most difficult skill to acquire was learning to sharpen the gravers. I never did.


GRS

Re: Custom engraving

#7

I knew you'd chime in David...

Scott Burr in Ben Lomond, CA


>If there's one here who knows...

Re: Custom engraving

#8

Ellis Walentine

Re: Custom engraving

Ellis Walentine


>That's the one, Mike. And only $1244. I'll have to put one on the Christmas list that I send to Uncle Tonoose. :-)

Great link. Thanks.

Ellis

Re: Custom engraving

#9

Re: Custom engraving

mikew


>Well, quality ain't cheap...

Ever considered taking a drive down to David B's and learning to do this by hand? Notice how I just committed him? .

Teasing aside, I think learning hand methods is best in the long run anyway. But that's probably just me. From an economic standpoint, it is a less costly way of exploring engraving and should the bug fully bite, well, start saving your pennies...

Take care, Mike

Re: Custom engraving

#10

Re: Check out GRS, too...

Dave Anderson Chester,NH


>I was there at L-N too and got to talk with Ellis for the first time in quite a while. I spent quite a bit of time with Vlad Skov and both the vise and the air powered engraver were from GRS. It seemed like a pretty nice setup and watching Vlad work was a real treat. Some of the adornments he made to the various L-N planes were really nice and made the planes look like 19th century works of art.