Draw Bore Pin
Darrin
>Well,
This is what I worked on for a couple hours today. I was inspired to create this draw bore pin, after watching ChrisSchwatz's video on Forgotten Hand Tools. Thanks for looking.
Darrin
Knowledge You Can Build On — Est. 1998
Draw Bore Pin
Darrin
>Well,
This is what I worked on for a couple hours today. I was inspired to create this draw bore pin, after watching ChrisSchwatz's video on Forgotten Hand Tools. Thanks for looking.
Darrin
Re: Draw Bore Pin
mikew
>Hi Darrin, thanks for posting this. I am about to make one as well. Now I have something to shoot for!
Take care, Mike
Re: Draw Bore Pin
John Clifford in Chicago
>Looks nice Darrin. I made a couple last year and the draw bore technique works like a charm. I also use a LN dowel plate to make my own dowels, it works really well too. There's a picture of one of the one's I made in the WC Articles page under How to make a draw bore pin. Please post some pics of some completed draw bored joints when you get the chance.
Re: Draw Bore Pin
Darrin
>John,
Thanks for the compliment. I think the LN dowel plate is my next purchase. Do you have any ideas on why Chris Schwarz says to cut the handle at 6 and 3/4 inches? There must be a reason, it seems a bit big on the small pair.
Darrin
Re: Draw Bore Pin
John Clifford in Chicago
>Darrin, I have no idea why he calls for such a long handle. I made the pair of both the bigger and smaller pins and 6 3/4 in. is fine for the larger of the two but not the smaller one. I'm giong to chop off about 1 1/2 in. on the smaller one and it'll be just right for me.
Happy 4th of July. John.
Re: Draw Bore Pin handle size
Pam Niedermayer - Austin, TX
>Because you're going to need to be able to apply a lot of purchase as you try to line up the tenon and mortise.
Pam
Re: Draw Bore Pin
Thom D
>I used a reasonably small handle placed at 90 degrees like a corkscrew. Just as they do them on reamers.
Re: Draw Bore Pin follow up
Darrin
>Okay, the smaller pair is handled in mesquite. Does anyone know if Texas Ebony will be good for handles on the larger pair?Thanks.
Darrin