Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Compare cordless drills on the numbers that matter

An Apology for being mean, MWTCA National Minn

Posts

An Apology for being mean, MWTCA National Minn

#1

An Apology for being mean, MWTCA National Minn

Slav Jelesijevich


>In our lives there are times we wish we can take something back what we said in a haste. Couple of days ago I posted that there is no Saturday only for the national in Minn this weekend. Wrote the post late at nite with a few beers in me, talked with a couple of friends of mine about the problems with the national, that I would like to see changed. My goal is for the new guys to be able to go to a show, it's a great experience, and always nice to come home with new toys. Friend of mine called me last nite and told me he was suprised by my post, he agrees with me but the way i went about was mean spearited, as I was talking to him I went online and reread the post and I felt like an old bugs bunny cartoon, where bugs pulls a fast one on Ellmer Fudd and he has STUPID on his forehead, wanted to go in a corner and hide. It was a late nite rant that should have been wrote with a clear head in a correct manner. Anybody who knows me will tell you that is not my style, I go by the motto what comes around goes around. Couple of night ago I was a first class dope, I apologies for being mean and attacking. That was not the way to go about making change. Learned a good lesson, now it's time to go to the hospital and get the shoe removed.

Slav

Re: An Apology for being mean, MWTCA National Minn

#2

Re: An Apology for being mean, MWTCA National Minn

Moses Yoder in White Pigeon, MI


>I have met you several times and so I really didn't read the post as being mean spirited or anything else out of line. I think things will need to change in the M-WTCA in order for it to keep growing, and it's up to our generation to keep it going. But there are reasons for things being the way they are, and things will need to change slowly with a lot of thought behind the changes, and I don't have all the answers. It would be really nice to be retired and have all the time in the world to work on such things, but by then I will be old and outdated in my ways :) I think it's great to be discussing such things in a forum like this, and there really was no need for you to apologize in my opinion. One thing I do notice is that the leadership of the M-WTCA is working hard at keeping the membership up and trying to figure out ways to grow the club. The biggest issue I see is that not enough people know enough about the club that they see it as time and money well spent. You really only need to go to one local meet and one national meet to be hooked for life, unless you have no interest in tools. Looking forward to the meet in Edwardsburg, MI and at Darley's Barn in August.

Re: An Apology for being mean, MWTCA National Minn

#3

Meeting July 15th in Scotts(Kalamazoo)

Jim Crammond in Monroe, Mi.


>Moses and Slav,

I agree that Slav did not really have to apologize for his comments. They may have been close to the edge but there was quite a bit of truth in what he said and if the M-WTCA is going to be an enduring entity, they will have to change.

I've faced this recently. I am sponsoring a M-WTCA Area C Meet in Kalamazoo on July 15th. With the exception of Ed Hobbs and Jim Bramel, I have gotten little or no co-operation or encouragement from the organization. Each copy of the Gristmill has an article about trying to generate an interest in recruiting new members, but the by-laws are written in a way that it discourages people from checking out the organization without making a commitment.

I think Moses' statements about change taking place slowly and that it is up to our generation to initiate them is true. It is also important to have this discussion if we want to continue an interest in the preservation of working with handtools.

If anyone in the Michigan, Northern Indiana, Illinois, Ohio (or anywhere else) wants info about the meet please contact me. Announcement flyers should be going out in the next day or two to current M-WTCA members.

Jim

Re: An Apology for being mean, MWTCA National Minn

#4

Re: An Apology for being mean, MWTCA National Minn

Dave Thompson


>I don't recall reading anything that might be offensive or any other reason to apologize. I saw it as you were just taking a poll to get a little feedback from a younger group (i.e. fewer ratio of retirees ) that have a similar and mutually beneficial interest. I think it's good that it resulted in feedback on both sides.

Picking up on the your earlier post and something that Jim here might have been eluding to.... For getting new blood, waving an entrance fee for first timers might be something to consider. Someone who has never been to one of the meets might be under the impression that they are like a specialized flea market with an annual fee. Only after attending would they know it goes far beyond that.

Dave

Re: An Apology for being mean, MWTCA National Minn

#5

Re: An Apology for being mean, MWTCA National Minn

Bill Houghton, Sebastopol, CA


>Slav,

Not having lived in the Midwest now for 33+ years, I didn't read that thread; but I've put up a few posts myself that, later, I asked myself what I was thinking when I did it. Regardless of whether or not others take your post to be mean, I appreciate your graciousness in stating your reaction.

Bill, making a fool of himself regularly since 1948

Re: An Apology for being mean, MWTCA National Minn

#6

Re: An Apology for being mean, MWTCA National Minn

Todd O. Cronkhite Maine Native in FL. Exile :~(


>Slav,

I admit that I had not read that thread until I saw this one,so I went and read it, and I must agree with the others that I did not pick up on any "mean spirits". Perhaps a small case of bad word-smithing,(but a few beers will do that to ya') but not mean spirits. My Major is as a buyer/user, and my Minor,--- very minor is as a collector, and I agree that it makes much more sense to hold these events on Fridays, Saturdays, and Sundays. The sellers certainly would have more potential sales I'd think.

The Sunday is for Church "agrument"--for lack of a better word-- that Moses brought up is a very valid one, and considerations should be looked at reguarding this issue, however I also feel that The Lord* will overlook a missed Sunday once in a while as His own Son was a Carpenter and I'm sure fully understands the draw to tools.

* "The Lord"

Whoooooooooooooo Boy, treading on thin ice here I know, but I want to clarify that The Lord in which I speak is the Father of Jesus. Please, don't let this statement start a war as it is not my intent. If you beleive fine, if you don't fine, that's your right as well.

Todd O.

Re: An Apology for being mean, MWTCA National Minn

#7

what is MWTCA National Minn?

bill tindall


>For those of us on the frontier, what does "MWTCA National Minn" mean.

Re: An Apology for being mean, MWTCA National Minn

#8

Re: what is MWTCA National Minn? *LINK*

Bruce, a MN Galoot


>Hi, Bill

the national MWTCA meeting starts today in Rochester, MN, home of the Mayo clinic. Can't attend because of work and the meet doesn't run on sundays, so that shuts out my attending.

Bruce


MWTCA National Meet

Re: An Apology for being mean, MWTCA National Minn

#9

possible reasons for 'Members Only'

John Fitzpatrick


>While I can't speak on behalf of any of the Tool Associations (and I'm certainly no lawyer or accountant), I have had the conversation about opening up the meetings (to non-members) with representatives of MWTCA and EAIA on a couple of occasions. Apparently there are issues with the groups' tax-exempt (non-profit?) status if they were to start charging admission and letting non-members particpate. Also, they would be obligated to start collecting sales tax on the lots sold at auction, which they don't need to do when the sales are restricted to club members.

Maybe somebody who knows about this can chime in here....

Re: An Apology for being mean, MWTCA National Minn

#10

Re: Gristmill

Moses Yoder in White Pigeon, MI


>I just got my copy of the latest Gristmill Wednesday before leaving on vacation last Thursday and noticed you were sponsoring a meet. I plan on being there of course, and since the info is in the mail I look forward to seeing it.

Re: An Apology for being mean, MWTCA National Minn

#11

I'm enlightened

bill tindall


>=there is one in my backyard, so to speak, this fall. I presume they sell stuff at these?

Re: An Apology for being mean, MWTCA National Minn

#12

Re: I'm enlightened

Slav Jelesijevich


>It's like a dream we all have, going to a flea market and it's all tools for sale or trade and displays are at shows. From cheap rusty tools to mint in the box stuff. There is something for everybody, users collectors and dealers.

Slav

Re: An Apology for being mean, MWTCA National Minn

#13

Re: I'm enlightened

Bruce, a MN Galoot


>And the biggies like Martin Donnelly and Patrick Leach are usually there as well.

Bruce