Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

O/T Proper use of a b@nds@w

Posts

O/T Proper use of a b@nds@w

#1

O/T Proper use of a b@nds@w

Todd O. Cronkhite Maine Native now in Jax Fl.

>Couldn't resist posting this pic. This is Mack, one of my many cats. I'd say judging by the smile on his face he is dreaming of catching a nice fat mouse.

Todd O.


img

Re: O/T Proper use of a b@nds@w

#2

Re: O/T Proper use of a b@nds@w

R.J.Whelan (Eastern Sierra, CA)

>Todd,

As I am owned by three cats, I can appreciate this picture with special understanding.

My experience leads me to a slightly different conclusion as to the reason for the smile: I think Mack fully understands that you cannot use the bandsaw while it is so engaged and he's getting great pleasure from your inconvenience.

Last night was fairly warm in the Owens Valley and Ben (a Maine Coon) felt it necessary to sleep with his furry body in full contact with me; in December, with temperatures in the single digits he's nowhere to be found.

RJ

Re: O/T Proper use of a b@nds@w

#3

Naaa, He's dreaming about

Scott Burr in Ben Lomond, CA

>Resawing them, But sir it's waffer thin...

Look like one happy shop cat IMHO.

Here's another one... gopher patte!


img

Re: O/T Proper use of a b@nds@w

#4

Beauty...

Denis Ch�nard, Orl�ans, Ont.

>I love cats (and they return the favor), but unfortunately I have become allergic to them with time... Shame...

Dogs, that's another thing... I haven't become physically allergic to them, but I hate them and they return the favor. I have a number of stories to prove that...

Dogs are a waste of fur, IMHO... Huskies and Spaniels, for some reason, are not a problem...

DC

Re: O/T Proper use of a b@nds@w

#5

Re: O/T Proper use of a b@nds@w

Dan Clermont in Burnaby

>Looks like that saw just Purrrrr's along ;)

Dan Clermont

Re: O/T Proper use of a b@nds@w

#6

Tried to take a pic of the new saw *LINK*

Marc in Luxembourg

>I know this too. Last week I got a new saw from Mike and I tried to make some pics, but couldn't get one without a dog (furred of course and feared too by some people but I don't know why ;-) )

BTW Mike's saw works great and is a gem. Finally this turned out to be a gloat. Shame on me!

Marc


img

dog on the right

Re: O/T Proper use of a b@nds@w

#7

do it yourself spaying?

Bill Houghton, finally Spring? in Sebastopol, CA

>

Re: O/T Proper use of a b@nds@w

#8

Good thinking Marc

Todd O. Cronkhite Maine Native now in Jax Fl.

>If I was showing off such a beautiful saw such as this I too would have a big dog, or perhaps a Grizzly Bear in the background to send the message "You mess with my saw, my dog/bear messes with you. ;~)

T.O.

Re: O/T Proper use of a b@nds@w

#9

Shhhhhhhhh Bill

Todd O. Cronkhite Maine Native now in Jax Fl.

>The vet did that a few months, and is still a bit of a sore subject with him. I try not to mention it around him as it puts him into a bit of a snit, and there is nothing worse than a snitty kitty. ;~)

T.O.

Re: O/T Proper use of a b@nds@w

#10

Re: Tried to take a pic of the new saw

mikew

>Nice picture, Marc!

That was fun to make--and test. Did a lot of cutting around my place with it as I shaped the teeth. Now my wife wants one, though a little shorter. I told her I would add it on the list...

Nice to see it has been already put to use!

Take care, Mike

Re: O/T Proper use of a b@nds@w

#11

Re: O/T Proper use of a b@nds@w

mikew

>Cool picture, Todd.

My cats like the bandsaw as well. Of course, the male likes the cast iron table more when his feet are damp it seems...

Thanks for the picture, Mike

Re: O/T Proper use of a b@nds@w

#12

1/2" blade for resawing cat?

jim reed @ tallahassee

>I think the blade needs to be wider 8-). (Note to all the animal lovers out there, my wife and I are staff to four cats--all of which are pampered beyond all belief.)

Re: O/T Proper use of a b@nds@w

#13

Tell more about the saw!

Wiley Horne

>Hi Marc,

The German shepherd looks typically alert and business-like. But we need to know more about the saw. Crosscut, right? How did you go about selecting the tooth-count? And the handle style? What have/will you use it for? How does it compare with the Atkins (which is a killer, by the way)?

Wiley

Re: O/T Proper use of a b@nds@w

#14

Re: Tell more about the saw!

Marc in Luxembourg

>Wiley,

It was quite easy the way I proceeded. I asked Mike to make a saw that cuts small spruce trunks like the one cut in the link. Because Mike is a saw specialist and tested here and there, he came up with the following specs. I might quote him here:

"22" in blade length, which is breasted. 6 ppi. A bit of a different tooth for a change. The 6 ppi teeth have a rake that is 30 degrees and fleam is around 45 degrees. Every 5th tooth is a rip-filed raker set about 1/8" lower than the remainder of the cross cut teeth.

This saw is meant to cut up to 6"/8" green Spruce in the field and the shop. Works well.

Handle is Bubinga. 7 1/4" high at the heel. The thumb notch at the top allows a comfortable placement of the second hand over the top for two-handed sawing."

I may add, the raker teeth are meant to bring out the sawdust when pulling back the saw too. It's the way bigger two man saws work.

The Atkins saw is from the bay, I got it for 5 GBpounds with a backsaw, so I couldn't resist. I will only sharpen. It is a great cc panel saw, skew back and taper ground.

Marc


img

Re: O/T Proper use of a b@nds@w

#15

Nothing like

Wiley Horne

>a purpose-made tool. I can vouch for the fact that Mike's great to work with--prompt, practical, thorough, and knowledgeable.

Wiley

Re: O/T Proper use of a b@nds@w

#16

Blade Question

Todd O. Cronkhite Maine Native now in Jax Fl.

>How thick is this blade? Wouldn't this type of teeth profile be known as a "docking saw" which was used for cutting wet wood.

Very nice sqaw, the more I look at it, the more I like it. Mike, you need to come up with a nice etch, but than again why spoil such a beautiful blade with an etch that will eventually wear off?

Marc, does that dog bite? Should I bring a steak with me when I come to........oops!

T.O.

Re: O/T Proper use of a b@nds@w

#17

Re: Blade Question

mikew

>Hi Todd,

The blade is .042".

Not sure. The old Disston docking saw I used at the mill didn't have raker teeth, but otherwise, similar.

I think I have settled on a medallion. It is designed and tests are being made to see what it takes to impress very cleanly.

Thank you for the kind words!

Mike

Re: O/T Proper use of a b@nds@w

#18

Re: Blade Question

Marc in Luxembourg

>Todd,

No problem that dog looks a little severe, but actually he's very kind. ...Better watch out for his SWMBO, she doesn't spent much time on warnings.

BTW I never used a saw like this. The thickness of the blade makes for an easy straight cut. In an average handsaw there is a light vibration you feel in the wrist when you push. This saw's steel doesn't flex at all. It's like cutting on rails.

Marc