Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

O.T.- Miniature Silver Oil Can

Posts

O.T.- Miniature Silver Oil Can

#1

O.T.- Miniature Silver Oil Can

Paul in NJ

>I found this little gem at the flea market yesterday and it was so cute I had to buy it. I should have put a coin in the picture to give you and idea of how small it is. It stands 3-1/4 high by 1 inch wide. It appears to be silver plate over brass, a little of the silver is worn on the back side. The top has a dangling pin in it; I think it is supposed to help seal the spout. It has washers that seal when the top is screwed down. The bottom is stamped made in the USA. I don't think it is valuable, the dealers and the customers are too sophisticated at this flea market. I thought it was neat and might hold my honing oil in my travel box. I was hoping one of you out there would give me an idea of how old it is and what it was used for. My thinking is that it belonged in a gun case but that is only a guess. Incidentally, if you were wondering, I traded a $5 bill for it.

Paul Dzioba


img

Re: O.T.- Miniature Silver Oil Can

#2

Re: O.T.- Miniature Silver Oil Can

Todd Hughes

>These are normaly called gun oilers though I am sure used for other purposes too, I've found them in with clock maker tools alot. I have seen a good many marked Remington and a couple with Winchester and I believe some with names of fishing reel makers on them too. Some of these can get pretty pricy but unmarked ones are very common and of not much vaule [though useful and pretty neat].

The little dangling pin doesn't have anything to do with sealing the lid but rather is an aplicator so that you can just put a bit of oil in the right spot.....Todd

Re: O.T.- Miniature Silver Oil Can

#3

Re: O.T.- Miniature Silver Oil Can

Paul in NJ

>Thanks Todd, that was quick! I was hoping you would reply and was pretty sure you would know.

Paul Dzioba

Re: O.T.- Miniature Silver Oil Can

#4

Thanks for sharing...

Dave Thompson

>I have one slightly bigger and alot uglier. I use it all the time in the shop for oiling frogs, irons, cap irons, lateral adjustors, depth adjustor screws, hand drills, etc.

Re: O.T.- Miniature Silver Oil Can

#5

got one just like it around somewhere

Victor P

>Handy little guy. Can't recall for the life of me where I found it, or what I might have paid. Must have been over twnty five years ago. Maybe back to my bicycle days.

Nice find.

Victor

Re: O.T.- Miniature Silver Oil Can

#6

Also sewing machines & fishing reels

Cooper Suter

>

Re: O.T.- Miniature Silver Oil Can

#7

Here's Mine

Todd O. Cronkhite Maine Native now in Jax Fl.

>Paul,

Mine has the same demensions as yours. I haven't used mine as I have been fearful of denting it.

T.O.


img

Re: O.T.- Miniature Silver Oil Can

#8

Re: Here's Mine

Paul in NJ

>That is cool Todd, it looks exactly the same as the one I have. I'm glad you put a penny in the picture for scale. I wouldn't worry about denting it as long as your not ham fisted.

Paul Dzioba