Re: Cleaning sharpening crud
wilbur
>You may have hit on the problem -- the fact that this was a major sharpening operation. Last night I spent at least 90 minutes sharpening the plane blade I was working on. It was a blade from a Stanley #7 that I just bought off of eBay, and although it was rust free, once I started sharpening, I noticed that there were many small pits close to the edge of the blade. My guess is that this blade was pretty rusty at one point and electrolysis was used to get the rust out, leaving behind the pits. I'm stil not done yet.
My other attempt at sharpening was with a used Stanley #4 blade, and that took me about an hour. That also was an inital setup, but the blade was in better condition in tems of not having a lot of pitting.
I'm guessing that once I have this blade tuned up, resharpening wil not take a lot of time, meaning less black crud to deal with.