Here is an idea
Derek Cohen (in Perth Australia)
>...the Soberg bench I was given for my birthday is going to have to be outfitted with wheels so it can be moved into a storage locker when not in use... I am currenlty trying to determine the most efficient sort of tool storage to build in the open space below the bench top...
Since we are talking storage, it is the main section (not the saw) that creates the problem. Examining this more closely, it is the vertical saw guides that take up so much room. So here is my idea ...
Attach a wooden base similar to mine to the #358 (a picture attached to my previous post). Make it wider on one side, the rear I suggest, and add a cleat to the edge. What you want to do is hang it upsidedown from your bench when not in use. My thoughts run to clamping it in a vise (hence the added cleat). The vertical guides then hang down out of the way. You could even use your bench with them "stored" in an end vise.
Perhaps you could come up with a variation of your own of this idea.
Regards from Perth
Derek