Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Harvesting a burl

Posts

Harvesting a burl

#1

Harvesting a burl

Rob in Kansas

>Looks like it's time to harvest a cottonwood burl from my grandfather's property while I can. I think it's about 24x16x10.

I was thinking cut it straight about 2 feet above and below the burl and coat the ends with anchor seal. Store it outside and covered where the air can get to it. Sound like the right way to go? Any suggestions?

Thanks,

Rob

Re: Harvesting a burl

#2

Re: Harvesting a burl

Bob Hackett

>Keeping a burl in one piece is risky at best.

What are your plans for this burl?It may be better to process it into oversize pieces appropriate to what you have in mind and then seal all the sawn surfaces.

Mainely,Bob

Re: Harvesting a burl

#3

Re: Harvesting a burl

Ernie Miller

>You are going to screw that thing up. seal the ends and bring it by my house I will get it all turned and show you the results. I won't be able to da that untill I get back from the beach though.

Re: Harvesting a burl

#4

Re: Harvesting a burl

Rob in Kansas

>Really? I thought with the multi-directional grain it would resist cracking.

My main objective is to get it while I can. My grandfather is on his deathbed and wanted me to harvest what I could for future projects. I wanted to leave it as long as possible, but with the way things look...well I just need to get it now if I ever want it. Since it is where Mom grew up it would be nice to have for sentimental value.

My thoughts were to after some evaluation see if I could get some turning blanks and also bookmatch pieces for small box/door panels and drawer fronts. Once I determine what I have then see what I can make for my mom from it.

Thanks,

Rob

Re: Harvesting a burl

#5

Re: Harvesting a burl

Rob in Kansas

>

Re: Harvesting a burl

#6

Re: Harvesting a burl

Rob in Kansas

>The message didn't show up...

We'll see... :)