Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

How to tame flaking chrome on a Record 044?

Posts

How to tame flaking chrome on a Record 044?

#1

How to tame flaking chrome on a Record 044?

Paul Erickson

>I just picked up a Record 044 which I need to plane the grooves for drawer bottoms, and unfortunately the chrome is flacking off in some strategic places drawing blood. I am tempted to just wirewheel all the chrome off the handle, but that might be a bit extreme. I also thought that if I can smooth the offending edges, and then paint the handle with a few coats of lacquer like they do with brass musical instruments that might provide enough surface stability to keep the razors from coming out and biting me...

Anyone else encounter this, and what was your solution?

Thanks in advance.

cheers, Paul

Re: How to tame flaking chrome on a Record 044?

#2

Re: How to tame flaking chrome on a Record 044?

Bob Hackett

>That chrome/nickel is going to keep flaking till it`s all gone so why not just remove it and be done with it.

It`s a Record plane and not a collectable so it`s value in in it`s use.In order to use it safely the chrome`s gotta go so...

Remember,"Chrome won`t get ya home",as old bikers used to say.

Mainely,Bob-An "old school" biker

Re: How to tame flaking chrome on a Record 044?

#3

Re: How to tame flaking chrome on a Record 044?

Paul Erickson

>Hi Bob,

I figured that was what I was going to have to do, but just wanted to check in case someone had a better idea I hadn't thought of.

Thanks for the time and attention.

cheers, Paul

Re: How to tame flaking chrome on a Record 044?

#4

Re: How to tame flaking chrome on a Record 044?

Dave Thompson

>Probably highly unlikely, but thought I'd mention it none the less since you're considering wire wheeling or maybe sanding it... During WWII Record used cadmium for plating on their 405 and ?maybe others planes? I know the 044 pre-dates WWII. Just something to stick in the back of your head. Personally, I don't have any experience with cadmium plating or know how distinguishable it is from chrome or nickel.

Dave

Re: How to tame flaking chrome on a Record 044?

#5

Re: How to tame flaking chrome on a Record 044?

Wes Harper

>I can't help but wonder if you couldn't sweat a dab of solder along the edge of the flaking. It wouldn't take much. I flake off what was already proud, use an electric soldering iron, and the file/sand it smooth. But then a drop of epoxy may do the same with less fuss. Be sure to post the results!

Re: How to tame flaking chrome on a Record 044?

#6

A few options

jim reed @ tallahassee

>Take a large splinter of wood (should be all over the workshop) and use it like a chisel to scrape and burnish at the same time. 220G sandpaper works also as does steel wool. Nice plane to use. Handier size than the bulky #45.