Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Fitting the double humped molding

Posts

Fitting the double humped molding

#1

Fitting the double humped molding

bill tindall

>I prepared two pieces of wood whose thickness equaled the width of the humped molding. I cut a 90 degree notch whose depth equaled 1/2 this width. In the second piece I cut&pared a point that exactly fit the notch. These profile patterns were used to cut the molding as show in PICS 1 and 2. I sawed the bulk of the profile and pared to the pattern. Many thanks to all that offered advice on this operation. This technique was quick and reliable.


img

Re: Fitting the double humped molding

#3

PS

bill tindall

>the hugely overexposed white wood is the pattern and the thin walnut piece behind is the double humped molding.