Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Frank ?

Posts

Frank ?

#1

Frank ?

Steve Mackay

>My question is for the after. When applying the shellac (finnish) what was the "oyster/pearl" effect on either side. Even after "tacking" there are allways "particals" of "stuff" that a finnish will build up on and I'll need to sand between coats. I allways had the impression from here that planing took this out of the equation. I'll admit, I'm a "Sander" also.

Re: Frank ?

#2

Re: Frank ?

Frank D. in Montreal

>My question is for the after. When applying the shellac (finnish) what was the "oyster/pearl" effect on either side. Even after "tacking" there are allways "particals" of "stuff" that a finnish will build up on and I'll need to sand between coats. I allways had the impression from here that planing took this out of the equation. I'll admit, I'm a "Sander" also.

Here the raised grain attracted more gunk. I usually sand every other coat of finish or so. I'll have to do the same test on more woods to come to any real conclusion, woods I'm more familiar with (I rarely use cherry).