Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Unusual Disston Saw

Posts

Unusual Disston Saw

#1

Unusual Disston Saw

Vlad

>Good afternoon,

I picked up a mint Disston (Toronto) saw. It has a double-toothed blade like the No. 14, compression wing nut but doesn't have a back. Any idea what model this is? Never seen one by Disston.

Is it rare Todd or Don?

Thanks in advance.

Vlad

Re: Unusual Disston Saw

#2

Re: Unusual Disston Saw

mikew

>Hi Vlad,

I've never seen a Disston version without the adjustable back. Could it be the adjustable back is just missing from the saw? If it originally had the back, I assume there would be a mortise where the back enters the handle vs. a plain kerf for the blade if so?

Here are mine:


The bottom one with the wingnut is the original Wuest patent, which Bishop ended up with. The middle and top saws are Bishop saws.

Take care, Mike

Re: Unusual Disston Saw

#3

Re: Unusual Disston Saw

Todd Hughes

>Is a Disston No. 80 Cabinet Saw. I got one or two around here somewhere. Was only made for about 10 years starting in the 1920s. One side should be filed 10 PPI rip and the other 15 PPI cross cut with a hole in the end to hang the saw up.The lever permits the handle to be adjusted according to what edge is being used..Was sold for fine cabinet and pattern making......Todd

Re: Unusual Disston Saw

#4

Re: Unusual Disston Saw

Vlad

>Yes. That's the one. I was on the Disstonian Inst. and didn't see one there. I suppose it's pretty rare eh?

Cheers

V.