Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

European Hatchet

Posts

European Hatchet

#1

European Hatchet

Todd O. Cronkhite Maine Native now in Jax Fl.

>Picked this up this morn for $15. I offered $10, but the seller wouldn't budge off the price, so I went to put it back on the table and another guy almost grabbed it out of my hand. As I was walking away he was talking to the seller. After walking away I regretted not getting it for the want of $5, so just for the heck of it I went back to his table, and lo and behold it was still there so I got it.

The handle counting going thru the eye is 17" long, the cutting edge is right at 5.5" and from the back of the eye to the cutting edge is 6.25". I have found no makers mark on it---yet.

Other than the handle being not original and needing replacement, the cutting edge being rusted, nicked up and needing sharpening and quite possibly the lower point of the cutting edge being broken off it just about Mint! ;~)

Any guesses of the country of origin and age?

The same seller had a old rifle that he said was an 1840's French one. Looked to have a bore of about a 16 guage shortgun. Wanted $200. Looked to be in fairly decent shape other than the barrel being a bit rusted. I didn't even pick it up as I didn't want to take a chance of mishandling it and have to pay for it.

Todd O.


img

Re: European Hatchet

#2

Head closeup 

Todd O. Cronkhite Maine Native now in Jax Fl.

>


img

Re: European Hatchet

#3

Re: European Hatchet

Dale Stansbery

>I don't know who made it, but why don't you send it to my neighbor and let her paint it so that it's worth having? :-)

Re: European Hatchet

#4

HA! FAT Chance Dale :~)

Todd O. Cronkhite Maine Native now in Jax Fl.

>

Re: European Hatchet

#5

at least the hand planes are safe...

John in NM

>Hardly any flat surfaces. Though I guess they could paint the sole. Unless its corregated.

Nice hatchet Todd. Head has a nice shape to it.

John

Re: European Hatchet

#6

Re: European Hatchet

Todd Hughes

>This type of axe is generally called a "Bearded" axe , I actually used to make a few of this type. A very old form that would not be out of place in Medeval times, used by lots of different tradesmen with some like wooden shoe makers having specialised ones.Is as you say from Europe and hard to pin it down past that. Lots of old stuff coming into the USA now from eastern europe in large shipping containers and I imagine that was how this axe got here.

Since these axes changed so little over the years is very hard to date them. When they were having the trouble over in Bosinia I used to see on the TV people chopping up firewood with simular looking axes.I am pretty sure they are probably still being made. If it is forge welded is probably a good sign that it is older , but even then still could date from the 1940s or so. While not always true a good sign that an axe is old is that it has a small eye and the eye is larger on the bottom, where the handle goes in, then it is at the top. Modern axes are normaly oppersite this

Still no matter a pretty nice axe and you bought it for a good price I think. I don't believe the blade is broken off but rather is just how they made it......Now Todd I wonder about that old gun you passed up!.....Todd

Re: European Hatchet

#7

Re: European Hatchet

Todd O. Cronkhite Maine Native now in Jax Fl.

>Ahhhhhhhhhhhhh Todd, Todd, I knew you'd be concerned over that gun, so I went back to the flea Sunday along with my digital camera to take pics of it for you. The seller wasn't there, matter of fact there where few sellers there. Guess they where all off visiting Mom eh? I look for it next weekend as well along with my camera.

Looked like a flint lock shotgun to me. For me, at this moment $200 is a bit steep, so I didn't even bother to tease myself by inspecting it, and as I said I didn't want to take a chance of damaging it and being forced to buy it as I could afford too. The seller seemed to be an alright guy, but than again, not what you'd call friendly either. The stock looked to be quite nicely shaped.

Thanks for your insights on the hatchet.

T.O.