Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Stanley 50 Cutters

Posts

Stanley 50 Cutters

#1

Stanley 50 Cutters

Andrew Stonina

>Dear Woodworkers,

I recently acquired a Stanley 50. Unfortunately there are no cutters with it. I know from the type and literature that came with it that it is the one that had 17 cutters with it. I am wondering if anyone here has an extra set of these cutters or can tell me where to get a set? Thank you, for your help!

AndrewDS

Re: Stanley 50 Cutters

#2

Ray Iles

Tony Sade (Charleston, WV)

>Try Ray Iles at:

http://www.oldtoolstore.co.uk/

ray@oldtools.idps.co.uk

I know he makes blades for some of the smaller comb. planes. Not sure about the 50 but he's worth a try as is Jim Reed who posts on most of the handtool forums. Not sure of his address, but he'll probably pop up in a minute or two.

HTH, Tony

Re: Stanley 50 Cutters

#3

Why our own...

Scott Burr in Ben Lomond, CA

>Jim Reed makes a set of Stanley 50 Cutters.

Re: Stanley 50 Cutters

#4

Re: Stanley 50 Cutters

paul womack

>Given the (fully justified) cost of a new set of cutters, you can most likely get a whole #50 with all cutters for the same money, or cheaper if your luck is in.

Just an option.

BugBear

Re: Stanley 50 Cutters

#5

Funny you mention the 50 cutters

jim reed @ tallahassee

>as I am getting ready to make a production run for some lonely planes of mine. Is your plane an early model (no adjuster lever) or more recent model (with adjuster lever)?

Re: Stanley 50 Cutters

#6

Re: Funny you mention the 50 cutters

Andrew Stonina

>It has a cutter adjustment lever.

AndrewDS

Re: Stanley 50 Cutters

#7

My plan was for the adjuster-less

jim reed @ tallahassee

>since they are much easier (less expensive) to make. In use I find the adjustment lever is of only slight help. Easy to take off and use lever less blades.

Re: Stanley 50 Cutters

#8

Re: My plan was for the adjuster-less

Andrew Stonina

>Is one still able to use the blades from the earlier (lever-less) models in the newer models (with lever)?

Re: Stanley 50 Cutters

#9

Adaptability of the #50

jim reed @ tallahassee

>#50 blades of any vintage can work in a #50 plane of any vintage in my experience. If you have a later model with adjuster lever, just remove the screw that holds it to the frame. Put it in a safe place and use your non-adjuster blades. The trick with blades and the #50 is that the blades must be pretty short. For example, the #50 cannot use most #45 blades because they are too long and strike the handle.

Re: Stanley 50 Cutters

#10

Re: Stanley 50 Cutters

Greg Brown

>I need a set of #50 cutters, preferably with the grooves in the back, but I can make it work without I guess I read the Jim Reed as a man who makes them, how do I contact him?....Greg Brown, Sydney Australia

Re: Stanley 50 Cutters

#11

Jack Guzman from Maine

Re: Stanley 50 Cutters

Jack Guzman from Maine

>I have bought irons from Jim Reed. He sells a good product.---Jack

jimreed2160@yahoo.com

Re: Stanley 50 Cutters

#12

Limited set for users??? Opinions?

jim reed @ tallahassee

>Steel prices and heat treating costs are way up. To reduce costs, I am trying to come up with a limited set for users. Which cutters would the average user need? Any opinions?

Re: Stanley 50 Cutters

#13

Re: Limited set for users??? Opinions?

Ted Shuck, Centennial, CO

>The ones I use most in my Stanley 50 are 1/8", 1/4", and 5/16". I use the 1/8" cutter for bounding the field on raised panels, the 1/4" for drawer bottoms, and the 5/16" to make the groove for raised panels. The 5/16" is also the same size as the 48 irons. I like to use the Stanley 50 for narrower grooves, but when I need a wider groove I usually use my 45.

Regards,

Ted

Re: Stanley 50 Cutters

#14

No beads?

jim reed @ tallahassee

>Thanks for the input.

Re: Stanley 50 Cutters

#15

Re: No beads? Nope.

Ted Shuck, Centennial, CO

>I don't use the Stanley 50 for beading. I find woody beading planes much easier to use for that.

Regards,

Ted

Re: Stanley 50 Cutters

#16

But suppose someone doesn't have woodies

Bill Houghton, finally Spring? in Sebastopol, CA

>how would a No. 50 be if it were the only plane someone had available for beading? Would it work well then?

My No. 45 works right well for beading - I'd assume a No. 50 would as well.

Maybe offering it as two sets - the straight irons and the beading irons.

Re: Stanley 50 Cutters

#17

Re: But suppose someone doesn't have woodies

William Duffield, on the Cohansey

>Beads are surface decoration. Tearout is a significant disadvantage. rabbets and grooves are joinery. Tearout is much more easily tolerated. Wooden molding planes have mouths to minimize tearout, but ploughs and metal combination planes do not.

Re: Stanley 50 Cutters

#18

Re: But suppose someone doesn't have woodies

Alice Frampton, UK

>I use a Lewin, which is on a par with the #50, for beading all the time with no problems. Beading is one of the things I find combination planes are really good at, fwiw, to the extent of leaving all the woodies lying unused on the shelf.

Cheers, Alf

Re: Stanley 50 Cutters

#19

Re: tearout

Ted Shuck, Centennial, CO

>This is why I don't use my combination planes for beading. I get a nicer surface from the woody beading planes.

Ted