Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Finally finished my workbench (pics)

Posts

Finally finished my workbench (pics)

#1

Finally finished my workbench (pics)

GolfSteve in Calgary

>Well it's finally finished. I started building the bench in March 2005 and finished it in April 2006, with a few other projects interspersed in there. It's a traditional cabinet maker's workbench based on the design promoted by Frank Klausz (and others).

The bench is a joy to work on compared to my old faithful plywood bench. I have absolutely no regrets about the time or money expended on the project.

The general dimensions are 8' long by 30" wide. The doghole strip section is 4" thick and the remainder of the bench is 3" thick. I planned to document building the bench so I took a lot of pictures. Last weekend I sat down to write up the process and ended up with over 80 pages! After a bit of editing this weekend and inserting a bunch of drawings it's up to 103 pages, so expect a bit of verbal diarrhea if you download the PDF file. It's not exactly the page turner that the DaVinci Code is, but hopefully it provides a bit of useful info for anyone building their own bench.

Since I mostly work with handtools I wanted a traditional bench. Rob Cosman promotes the utility of the shoulder vice as do Scott Landis and Frank Klausz, so I used that style of vice even though I've never really had a chance to work with one before. I really like the tail vice and the planing stop. The tail vice is the most useful feature of the whole bench, except for the nice flat reference surface.

At some point in the future I'll get around to shortening the shoulder vice screw, adding a flip-up saw stop, and building a bathroom vanity between the stretchers, but for now I'm done.

Hope you enjoy,

Steven

Workbench Write-up (4.3 MB)












Re: Finally finished my workbench (pics)

#2

OH, MY ! ! !

Steve Mackay

>STUNNING ! You better throw a big gloat out there ! A true craftsman !

Re: Finally finished my workbench (pics)

#3

Re: Finally finished my workbench (pics)

Alan Bierbaum, near Denver, CO

>Nice looking bench. You will enjoy all of the features for many years.

Alan

Re: Finally finished my workbench (pics)

#4

SWEET!

Scott Burr in Ben Lomond, CA

>It looks great! I'm jelous too! Who made the vise screws?

A fine job, love those DT's

One day my bench will come...

Re: Finally finished my workbench (pics)

#5

Wow...

Ted Owen, Pittsburgh

>that's a real beauty!! Nicer than mine, which is nearly the same design.

What finish did you use?

Best, Ted

Re: Finally finished my workbench (pics)

#6

Steve Kubien

Bravo!

Steve Kubien

>That looks really great. Congrats on a job well done. I had a love/hate relationship with my shoulder vise and I hope you come away on the positive side.

Hey, excellent job with the photos too. Crisp and clean.

Steve Kubien

Ajax, Ont.

Re: Finally finished my workbench (pics)

#7

Re: Finally finished my workbench (pics)

Jim Shaver Oakville, Ont.

>Hi Steve,

Simply wonderful. I love the attention to detail, your wood choices, the craftsmanship and the finish!!

It's a definite staement, loud and proud.

When I built my bench it also took over a year, I found I had work top/bench to help me build mine, I could never have done it with out it!

Take care,

Jim

Re: Finally finished my workbench (pics)

#8

Re: Finally finished my workbench (pics)

Tom in Tipp

>That's a nice one! Great job on that and enjoy it for all it's worth

Tom

Re: Finally finished my workbench (pics)

#9

What's that? A bowling lane with a crank?

Denis Ch�nard, Orl�ans, Ont.

>Where do you put the pins? :D

Beautiful work Steve, I wish I had one like that (and a shop large enough to host it!)...

DC

Re: Finally finished my workbench (pics)

#10

'Tis a Thing of Beauty and 'Twill Be

BobHutchins in central TX

>a JOY forever.

Ya done GOOD, Steve!

Now knock it down, call brown and ship it to me. PM me if you need the address.

BobH

Re: Finally finished my workbench (pics)

#11

Re: SWEET!

GolfSteve in Calgary

>Don't know who made the bench hardware (they're made in Germany), but Lie-Nielsen sells them.

Re: Finally finished my workbench (pics)

#12

Re: What's that? A bowling lane with a crank?

GolfSteve in Calgary

>Yeah, I have finally realized that my car will never live in the garage again :-( Back to -30 and scraping the windows.

Re: Finally finished my workbench (pics)

#13

Lee Valley's polymerized tung oil.

GolfSteve in Calgary

>

Re: Finally finished my workbench (pics)

#14

All I needed to know...

Scott Burr in Ben Lomond, CA

>How are they Steve? I'm takning backlash, general fit and finish...

That's one nice bench!

Re: Finally finished my workbench (pics)

#15

Re: 'Tis a Thing of Beauty and 'Twill Be

Todd O. Cronkhite Maine Native now in Jax Fl.

>Dang Steve, what really knocks my socks off is your Craftsmanship, WOW!! YOU DONE GOOD! Sure puts mine to shame beauty wise. Let us know how things go when you put 'er thru 'er paces on the shakedown run.

Being a non-pro writer, it is my understanding that when one edits, the idea is to shorten the piece. ;~)

Todd O.

Re: Finally finished my workbench (pics)

#16

Re: All I needed to know...

GolfSteve in Calgary

>They are nice compared to the other offerings I've had the chance to try out. There's essentially no backlash in either screw; maybe a little in the shoulder vice screw but not very much.

The shoulder vice screw has a particularly coarse thread so it moves in and out very quickly. The vice also tightens up with around 1/8th of a turn after it is hand tight and holds quite securely. I wish there was a shorter screw available at exactly the length given by Frank Klausz in The Workbench book so that we wouldn't have to shorten the screw ourselves. I thought about making the shoulder vice larger, but decided that if I did that the vice could be put under too much stress. I don't really have a proper grinder or a metal lathe to shorten the screw, so that task will have to wait for another day.

The welded tail vice appears to have had the mounting tabs machined flat and parallel after the vice was assembled. It was darn near perfect. I did file the ends of the vice square (they had been sheared off instead of cut), but that was the only fettling I did. The tension adjustment screws that come with the vice are easy to use and, once set properly, the vice operation is very smooth.

My only disappointment was that the tail vice handle I purchased with the vice was undersized for the size of hole in the handle casting. I replaced the wooden handle with a dowel 1/8" larger in diameter and I'm happy with it now.

The hardware was quite a bit more expensive than some of the other offerings (perhaps double the price), but for me I think the extra $150 CDN was worth it.

Re: Finally finished my workbench (pics)

#17

Re: Finally finished my workbench (pics)

arw01

>My oh my Steve. I must say your bench looks more like fine furniture!

I won't be making it back to Calgary this year for Rob's class, as you know I'm building a shop soon as the money lady comes through. Although I have sent my wife to Vegas just last week, and she and her girlfriend are going again in September. So I have at least 2 woodworking vacations in the bag for next year.

I'm hoping the Northwest School for Woodworking can coerce Rob into coming down to Portland to put on a class.

Alan

Re: Finally finished my workbench (pics)

#18

worthy of 103+ pages!

David Jeske

>That is a beautiful bench! You can tell you speant thought and time on every detail and then executed them perfectly. Thank you for sharing all the pictures.

Dave

Re: Finally finished my workbench (pics)

#19

Re: Something is wrong!

Thom D

>Never mind, I thought it was the bench. Just been so long since I have actually seen my bench, I forgot what it looked like under everything... I need to make a new one!

Re: Finally finished my workbench (pics)

#20

That is indeed an awesome bench

HC Sakman @ Victoria, BC

>Very nice work Steve, very nice.

Now, whatcha gonna do on it? ;-)

Chico...

Re: Finally finished my workbench (pics)

#21

Thanks Steve!

Scott Burr in Ben Lomond, CA

>I was curious about LN vises. Glad you to hear you like them. Thanks for sharing!

Again a very nice bench!

Re: Finally finished my workbench (pics)

#22

Re: Finally finished my workbench (pics)

Dan Clermont in Burnaby

>Very nice Steve!

Definitely gonna have to download your writeup for future reference

Cheers

Dan Clermont

Re: Finally finished my workbench (pics)

#23

Jack Guzman from Maine

Scraping windows

Jack Guzman from Maine

>I may gripe a tiny bit while I'm scraping the ice off my car windows,but after I clear the snow from the shop(former garage)door and step inside my warm shop,I realize the small sacrifice is well worth it.---Jack

Re: Finally finished my workbench (pics)

#24

Jack Guzman from Maine

Oh yeah..

Jack Guzman from Maine

>Beautiful bench.I like the detail pictures.Awesome job.---Jack

Re: Finally finished my workbench (pics)

#25

Handsome bench you have there Steve!

Raymond in Trenton, NJ

>Great job ... Congratulations.

Thanks for taking the time to do the excellent write up (with pics and dwgs too!) I'm picking up a subtle hint here, that you're mildly pleased that it's done :o) Well, it sure looks like it was worth the effort and the wait. Have fun using it.

Raymond