Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Rasps?

Posts

Rasps?

#1

Rasps?

sawdustdan

>Good morning

I have recently purchased Nicholson #49 and #50 rasps. I never realized how well a quality rasp could work wood my only previous experience is with cheap hardware store variety

Anyway the teeth seem to load up on wood (mostly hardwoods) pretty quickly and need to be cleaned out alot. Is this normal, is there some additional preparation they need?

Thanks

Dan

Re: Rasps?

#2

Re: Rasps?

mikew

>Hi Dan--softer hardwoods will clog the teeth more than denser hardwoods. Same is true of the oilier woods like Cocobolo.

Get a good stiff bristle brush [not wire] and use it frequently.

I love using rasps--great tools. Just wait until you discover the more expensive variety. Even better for most of what I do. Talk about a slope to slide down on...

Take care, Mike

Re: Rasps?

#3

Jim in Burlington Ont.

Dry Cote

Jim in Burlington On

>I've tried Dry Cote and it seems to help with loading quite a bit.

Re: Rasps?

#4

Re: Rasps?

Brent Smith

>Hi Dan...I found that applying to much pressure while cutting caused my Nicholsons to clog up faster. Just let them do the work. If you really want a treat, try an Auriou.You'll find that they glide across the work and, I find, clog alot less often. As Mike said, make sure you use a bristle brush on your rasps. Wire brushes will just dull them faster.

Re: Rasps?

#5

Re: Rasps? Thanks

sawdustdan

>For the tips I figured something to do with technique might be a factor to.

Dang it now I'm probably gonna spring for an Auriou just to see how much better it can get. Fun stuff discovering how hand tools should really perform.

Dan

Re: Rasps?

#6

Jack Guzman from Maine

Re: Rasps? Thanks

Jack Guzman from Maine

>Auriou rasps aren't flashy luxuries.They are a real well made tool.Once you use one you'll wonder how you managed without one.---Jack

Re: Rasps?

#7

Which Ones

Dan CLermont in Burnaby

>Hi Jack,

Say a guy only has Nicholson files and the Micro Rasps. Which Rasp would you find most useful for drawer pulls, totes and other gentle curve like a QUeen Anne leg?

I can never figure out which grain would be best if one couldn't afford many Auriou's

Cheers

Dan Clermont

Re: Rasps?

#8

Jack Guzman from Maine

Re: Which Ones *LINK*

Jack Guzman from Maine

>I use a 14 grain small modeller's rasp and a 12 grain medium length.I got interested when I saw Chris Schwarz using the small one to shape a saw tote he was making at a Wood Works show.They handle all my needs.I got them mostly to shape handles,spokeshaves and other small projects.I reach for one or both whenever I have a tricky shape.I only use the 49/50 for rougher work.---Jack


the rasps

Re: Rasps?

#9

Re: Which Ones

Brent Smith

>I also use 14 grain for detail work. For something like a Queen Anne leg I use an 11 grain to get it down to size and then finish with a finer grain. I also occasionnaly use a 12" 8 grain if there is a lot of material to remove, believe me it doesn't take long with this beast.

Re: Rasps?

#10

Re: Which Ones

Slav Jelesijevich

>Depending on the work your doing I like using cabinet rasps with matching cabinet file, for general work. Don't beat up my 49 and 50 anymore. Comes down to using the right rasp for the right job.

Slav

Re: Rasps?

#11

Re: Which Ones

Brent Smith

>Hi Slav....good to see you here....What would you consider a comprehensive set of rasps and files for general WWing?

Re: Rasps?

#12

Re: Which Ones

Skip in Falls Church

>Hi Slav,

If I had to pick just one rasp, I swear it's that aluminum file you sold me a couple of years ago. It cuts fast and aggressively but leaves a nice enough surface that I can go straight to a scraper most of the time.

Good to see you here too!

Skip