Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Coffered lid blanket chest complete (pic)

Posts

Coffered lid blanket chest complete (pic)

#1

Coffered lid blanket chest complete (pic)

Alan Bierbaum, near Denver, CO

>I posted this on the main board Friday. I finally remembered that I had posted here with questions/information on the coffered lid. (I did use hand tools for a good bit of the construction.)

This blanket chest was built to be placed at the foot of a Shaker bed. It is built to look like an antique using a mix of hand and power tools. Tool marks are left on the interior surfaces on purpose (as would have been done on a real antique). The chest is made from White Ash with a finish color of Nutmeg and top coated with shellac and wax. One dovetailed till is included and sized at one half of the inside width. The chest has four small button feet and sits on a stand when not being moved about. All exterior surfaces feature raised panels (including the bottom panel). The largest challenge was building the coopered lid. Hardware was selected appropriate for a "traveling" trunk of the period. Chest construction is mortise and tenon. Everyting is held together with hide glue.




Alan

Re: Coffered lid blanket chest complete (pic)

#2

Very nice, Alan

Bill Houghton, might be Spring in Sebastopol, CA

>The coffered lid really adds a lot to the piece.

Re: Coffered lid blanket chest complete (pic)

#3

Nice job!

John in NM

>I'm curious how you raised the coopered panel. My first inclination would be with a router table and one of those vertical bits, though I bet one could make a radiused panel raising plane too. I've always wanted to build something with curved panels, but haven't gotten to it yet.

Looks like that was a fun project, good work once again.

John

Re: Coffered lid blanket chest complete (pic)

#4

Re: Nice job!

Alan Bierbaum, near Denver, CO

>Thanks. I raised the panels in two steps. First step was on the router table with large (3 7/8" dia) horizontal bit. If you don't feel comfortable doing this hand held router table work; don't do it (be very sure of your grip and control). Since the result was less than what I would expect from a fixtured (or finger boarded) router table cut; I finished off with the large and medium shoulder planes.

Alan


img

Re: Coffered lid blanket chest complete (pic)

#5

Beautiful...well done.

John Pappas

>

Re: Coffered lid blanket chest complete (pic)

#6

Well Done!

Scott Burr in Ben Lomond, CA

>It looks great! You should be proud of it. Did you make the bed too?

Re: Coffered lid blanket chest complete (pic)

#7

Re: Well Done!

Alan Bierbaum, near Denver, CO

>Thanks - yes I made the bed (very little hand tool work there though).

Alan


img

Re: Coffered lid blanket chest complete (pic)

#8

Re: Coffered lid blanket chest complete (pic)

Mike Fitterling

>Beautiful work!

I really have to try my hand at coopering one day.

Re: Coffered lid blanket chest complete (pic)

#9

Re: Coffered lid blanket chest complete (pic)

Alan Bierbaum, near Denver, CO

>Thanks. The coopering part was easy; making the coopered panel into a raised panel was the hard part.

Alan

Re: Coffered lid blanket chest complete (pic)

#10

Damn you Alan!

Derek Cohen (in Perth Australia)

>Dammit Alan!! Now that is one more thing my wife has placed on the To Do List! Not to mention that she has flights of fantasy if she thinks I can make anything as nice as yours. That is sooo nice. Dammit! :)

Regards from Perth

Derek

Re: Coffered lid blanket chest complete (pic)

#11

Re: Damn you Alan!

Alan Bierbaum, near Denver, CO

>Tell your wife that she has good taste in furniture (G).

Thanks for the comments and let me know if you need further information on size or construction (my email address is good).

Alan

Re: Coffered lid blanket chest complete (pic)

#13

Nice!

Scott Burr in Ben Lomond, CA

>I wish I had a lathe.

Dog powered or other...

Re: Coffered lid blanket chest complete (pic)

#14

Re: Coffered lid blanket chest complete (pic)

les winter

>Lovely chest, Alan.

Would you answer a question? How is the connection made between the curved end piece and the curved top?

thanks

Les

Re: Coffered lid blanket chest complete (pic)

#15

Re: Coffered lid blanket chest complete (pic)

Alan Bierbaum

>The end cap has a groove routed in it to accept the panel. This way, the panel fully floats to allow for wood expansion. Thanks,

Alan


img