Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Nearly 100 Exotic Wood Species, Direct-Imported Since 1972. Shop Slabs & Turning Stock.

Sweetheart No 5 lever cap question

Posts

Sweetheart No 5 lever cap question

#1

Sweetheart No 5 lever cap question

Raymond in Trenton, NJ

>Hi All,

I have a question concerning a new addition, but first some background. It was such a Bee-U-tiful morning and the flea market was just too inviting. With a unanimous vote from the car pool (both of us), we pulled in to stretch our legs. Actually, the car pulled in by itself (really). Not a whole lot to be seen, just crisp, fresh air, the peeking of sunshine and this number 5.



The first thing I noticed was it wasn't a low knob, but I'm easily pleased and it was pretty clean. I'm sure I'm the only one who's sweet on the low knobs, right? As I went to pick it up, the Sweetheart logo on the iron caught my eye. It was an early one, 1920 according to Walter (well Roger Smith really). The plane typed out as a 12.


Now comes the surprise (for me at least). When I removed the lever cap I saw this cast into the underside �








Now I haven't experienced the millions of lever caps that Todd Hughes has, but I've seen a fair number and don't recall seeing any with this. I've seen the odd letter marks for the different foundries Stanley used and the cast in patent numbers, but not this. Anyone seen this or know a little more about it? I didn't come up with anything from my copy of Walter. This just has my curiosity going.

Thanks,

Raymond

Re: Sweetheart No 5 lever cap question

#2

Re: Sweetheart No 5 lever cap question

Todd O. Cronkhite Maine Native now in Jax Fl.

>Ray,

I think you've got something fairly rare there, NICE FIND! Trade ya' a low knob for it, or how about a Bedrock? Mind you what I think is a Bedrock may or may not be what you think is a Bedrock. To be safe I'd take the low knob offer. Just to be sure tho, would you like a plane attached to that low-knob. ;~)

Seriously tho, I think you've really got something fairly unique and I'd be contacting some big time collectors to see what they have to say about this.

Todd O.

Re: Sweetheart No 5 lever cap question

#3

Re: Sweetheart No 5 lever cap question

Liam Thomas

>Hi Raymond,

I have a number 5 with the same lever cap as shown in your pictures, I sent off an email to Patrick Leach about it:

"I recently purchased a lovely Stanley No. 5 type 11 (low knob, 3 patent dates cast behind the frog) and noticed something interesting about it that I can't find much information on, except for a brief mention on an internet Stanley bench plane type study. On the underneath of the lever cap there is an outline of the Stanley notched rectangle and sweetheart logo. I was wondering if you knew anything more about this plane? Is it collectable or can I use it without worrying about it's worth to a collector?"

Patrick's reply:

"The mark really means nothing, and it's just something done to the pattern, I suspect, ca.1930. They are not common lever caps, but does not add a premium to the plane."

Not sure about the ca.1930 as mine is definitely a type 11, purchased for �18 off evilbay, that's approx. $32 USD :-)

Anyway, just thought I'd share that with you.

Regards

Liam

Re: Sweetheart No 5 lever cap question

#4

Todd-O, you need to say out of the sun :o)

Raymond in Trenton, NJ

>

Re: Sweetheart No 5 lever cap question

#5

Thanks for your info

Raymond in Trenton, NJ

>Thanks Liam,

I appreciate you sharing your info. I figured it wasn't something to force an early retirement :o) just something neat.

Basically I was fishing for other info about that casting mark. I don't agree with Patrick's 1930 date either. I think it was earlier, 1918-1920. This would make sense based on your type 11 and my type 12. Both Roger Smith's Bailey bench Plane type study and Bob Kaune's Bed Rock type study show the iron trademark from my original post as in this timeframe. I also think that if it was later there would be more around.

Hey, maybe we can cook up a story for Todd-O about how a Stanley foundry worker (from somewhere near the tippy-top of Androscoggin Co, Maine) was bored one day and doodled on the sand casting. Resulting in us having lever caps that look like they do. Whadaya think? I think he'll buy it ... literally, of course (Hee, hee, hee)

Raymond

Re: Sweetheart No 5 lever cap question

#6

Re: Thanks for your info

Joe Rogers, Northern Virginia

>Hey Ray. Don't get too excited about Ole Todders gullibility. Let Ernie take those shots. Then we can keep our heads down and watch the show.:-) Just Kiddin Todd...JR

Re: Sweetheart No 5 lever cap question

#7

HAY!

Todd O. Cronkhite Maine Native in FL. Exile :~(

>Why's everbody pickin' on me? ;~)

Ray, had you ground the sides flat amd put on a Bedrock lever cap you'd of stood a fair chance, but atlas I'm on to ya' now. I've now got to rearrange my "Watch these Bass-dids like a Hawk" list. Sheeeeeeeeeeeeesh!

Haven't heard much from Ernie lately, I think he's trying to lure me into a false sense of security only to pop out like a jack-in-the-box when I least expect it.

Todd O.

Lets see now 1.Ernie

2.Bob

3.Ray

No wait 1.Ernie

2...................