Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Making a nosepiece for an English bullnose

Posts

Making a nosepiece for an English bullnose

#1

Making a nosepiece for an English bullnose

Bill Houghton, might be Spring in Sebastopol, CA

>I'm watching an eBay auction right now with a Record 311 on it that has the long nosepiece but not the bullnose piece. How feasible would it be to fabricate a nosepiece for this, using common hand tools like hacksaw and files?

Re: Making a nosepiece for an English bullnose

#2

I wont be a problem...

Scott Burr in Ben Lomond, CA

>It would be easy to made one IMHO. Just a block of steel with a hole in it and 2 pins for alighenment.

Re: Making a nosepiece for an English bullnose

#3

Re: Making a nosepiece for an English bullnose

Dave Thompson

>If it turned out to be more than you want to get into, it seems you could make this piece easily enough out of wood. It's not like a bullnose gets alot of wear and there would be concerns about a wood nose wearing out.

ofcourse aesthetic concerns are personal.

enjoy,

Dave