Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Bevel up, Bevel Down Observation

Posts

Bevel up, Bevel Down Observation

#1

Bevel up, Bevel Down Observation

Jerry Nicholson

>Either way, you can get a bad bite if you are not careful when you wipe off the 50,000 grit diamond paste. DAMHIKT!

Jerry, who keeps the superglue handy

Re: Bevel up, Bevel Down Observation

#2

Yeah but....

Rob Lee

>... the bevel-up wound will heal faster.....

:)

Cheers -

Rob

(Gettin' ready to (hopefully) watch the Sens put the TML out of their misery....)

Re: Bevel up, Bevel Down Observation

#3

Theory?

Jerry Nicholson

>Is that a theory or do you have emperical evidence?

Jerry

Re: Bevel up, Bevel Down Observation

#4

rotflmao! Thanks, Rob.

Pam Niedermayer - Austin, TX

>

Re: Bevel up, Bevel Down Observation

#5

Re: Theory?

Bob Hackett(Mainely,Bob)

>It`ll heal quicker because it has less tearout.

MB-Who`s takin` a turn duckin`and runnin`

Re: Bevel up, Bevel Down Observation

#6

Definitely Bevel Down

Dan Clermont in Burnaby

>Will give you less tearout.

;P

Dan C

Re: Bevel up, Bevel Down Observation

#7

Put your hand up if ..

Derek Cohen (in Perth Australia)

>... have not knicked a finger on the edge of a sharp #78/778 blade!!

I wonder what others find to be the more "dangerous" planes?

Regards from Perth

Derek

Re: Bevel up, Bevel Down Observation

#8

Re: Put your hand up if ..

mikew

>Hey Derek,

The only bite from a plane was from a #10 1/4.

Now about those chisels...

Take care, Mike

Re: Bevel up, Bevel Down Observation

#9

Re: Bevel up, Bevel Down Observation

Dave Thompson

>Yep, extracted an Ohio #O5 blade from my thumb just yesterday while trying to wrap up sharpening just a little too quick....

Re: Bevel up, Bevel Down Observation

#10

Re: Put your hand up if ..

William Duffield, on the Cohansey

>I think my #140 has drawn blood most often.

Re: Bevel up, Bevel Down Observation

#11

Me Too!!!

Dan Clermont in Burnaby

>The LN 140 is a bugger for that. Same goes with the 60 1/2R

Dan C

Re: Bevel up, Bevel Down Observation

#12

Jack Guzman from Maine

Re: Put your hand up if ..

Jack Guzman from Maine

>The almost useless 75 has one function that it does quite well. It draws blood almost every time I use it. Anyone got creative bloodstain removal tricks?---Jack

Re: Bevel up, Bevel Down Observation

#13

Re: Put your hand up if ..

Paul Kierstead

>It's the corner of chisels that get me, not the ends (though they have got me too...). I get a whole series of little cuts. Yes, I know I could relieve the corners (and do once I get cut enough...)

Re: Bevel up, Bevel Down Observation

#14

Hmmm... It seems to me

Scott Burr in Ben Lomond,CA

>That a bevel up would really dig into you in an unrestraned state.

Seems to me a bevel down blade would inflict less damage. ;^)

YMMV of course...

Re: Bevel up, Bevel Down Observation

#15

Yep!

Scott Burr in Ben Lomond,CA

>Chisels way more than plane blades for me.

Re: Bevel up, Bevel Down Observation

#16

Ditto

Tom MacGregor

>When I first heard about Scary Sharp I tried it on a set of Marples paring chisels. Didn't even know I'd touched a finished one laying on the bench until I saw the drop of blood.

Re: Bevel up, Bevel Down Observation

#17

Re: Put your hand up if ..

mikew

>Hi Paul,

Yep, 3" long, 1/4" deep slice through my stomach one night at about 11:30 pm. 1 1/2" wide Sorby paring chisel. Worked slipped. Had the piece in the vise too high and it twisted out because some idiot didn't tighten up the vise properly.

I can still hear myself gently waking my wife up to help me so as not to alarm her too much...that lasted as long as her seeing me holding it together.

Dumb accident. I was too tired to be working.

Take care, Mike