Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

How my #5 1/2 was pressed into service

Posts

How my #5 1/2 was pressed into service

#1

How my #5 1/2 was pressed into service

Jim Reed @ Tallahassee

>I am building some bookshelves (hack carpentry using 2x4s & plywood). The base is a rectangle of 2x4s. I noticed on my prototype that the base rocked on the worktable because the 2x4 had a slight bow. I clamped it down, got out the #5 1/2 (first plane I found that was larger than a #4) and made some shavings. Beautiful fit. Now back to electron burning.

Re: How my #5 1/2 was pressed into service

#2

Re: How my #5 1/2 was pressed into service

Todd O. Cronkhite Maine Native in FL. Exile :~(

>Now back to electron burning.

You're a sick man Jim Reed! ;~)

T.O.

Re: How my #5 1/2 was pressed into service

#3

#4 also

Jim Reed @ Tallahassee

>Then I used to my #4 to shave down the plywood back to make it even.