Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Removing japanning, and is it even japanning?

Posts

Removing japanning, and is it even japanning?

#1

Removing japanning, and is it even japanning?

Bill Houghton, raining and raining, Sebastopol, CA

>My No. 78 has a depth stop, purchased about three years ago from Stanley, that appears to have been dipped in black pancake batter. There's evidence that, under the thick glop of something black, there's a sharp spine to mate with the groove in the plane body, but I have to extrapolate from the lump on that face. The similar glop on the other face means that the screw doesn't make good contact with the depth stop.

As a result, in heavy use, it slips.

I think it would work better if I removed all the paint.

Two questions:

1. Is it likely to be japanning, or have they stopped using that?

2. Either way, what's the best way to remove it?

Re: Removing japanning, and is it even japanning?

#2

No. 3...

Scott Burr in Ben Lomond,CA

>Ask one of us...

If you can't get it off, email me...;^)

Re: Removing japanning, and is it even japanning?

#3

P.S. ...

Scott Burr in Ben Lomond,CA

>I'm no help with the black tar, sorry Bill...

If you had to ask about it, your all ready one step ahead (or behind) of me. Good luck!

Re: Removing japanning, and is it even japanning?

#4

Pocketknife

Jim Reed @ Tallahassee

>The country boy sez to scratch it with a universal tool (pocketknife). Many times paint is brittle and sticks to itself better than it bonds to metal. You may be able to worry most of it off pretty easily if you pick at it carefully. Good luck.